T56 guys... I need a pro 5.0 shifter handle

QUASAR

QUASAR

Club Member
Looking for a stock handle from a Pro5.0 T56 shifter. Maybe someone switched to a lou's short stick or some other handle. I stripped mine out.

Not sure if other t56 cars like the 03-04 cobras have the same angle to the handle (near the base) so it might only be fbody pro5.0 handles I can use.

Let me know what ya got. Thanks :cheers:
 
can you just drill out the threads and put bolts through it with nuts on the ends? i think i have a steeda tri-ax shifter handle in storage for an 03-04 cobra if that will work but im not sure if its even there...
 
1BADAIR said:
the mounting bolts or the knob stripped?
Click to expand...

I guess I should clarify, the threads at the knob end are toast from taking the knob off a million times the last 6 years. The mounting holes at the bottom of the handle are clearance holes only, the threading is in the other part.

Jeff now that I think about it, don't mustangs have that bend in the handle to bring the knob back further? I don't think they're the same as Fbodys. Thanks though.
 
1BADAIR said:
hacksaw and a die set
I forgot what the size is but I probably have it
Click to expand...

I'll have to look at it again but I think it tapers down a bit under the threads and gets skinnier. I already have the stock handle cut down quite a bit, so I'd have to fix the threads that are there.

If I can't find any other solution maybe i'll come see you when i'm out at Brians one day he lives out in the boonies by you.
 
You must log in or register to reply here.
Back
Top