wide winger
Motown's very own village idiot!
Well since Fathouse Fabrications did it up right and tuned the Talon to run like a damn fucking fright train. I though tit was time to give the old girl a face lift. Remove to 90's look and say hello 2014. Short list: 
Remove alcohol spray control since the car did not need it anymore.
F F made a killer catch can to take the alcohol bottles place under the hood, polish can.
Replace the old air filter intake pipe with a aluminum FF custom pipe, polish pipe.
Replace pods for both boost and exhaust temp gauges with new matching ones from Auto Meter.
Replace the cam cover, oil cap and COP plate with the one I bought from Frontline Fabrications.
Polished and install Avid Racing motor mounts.
Replace or repair then customize the coolant line from motor to radiator.
Cover the hole left behind from the spray nozzle on the intercooler piping, have piping chromed.
Remove front suspension pieces, powder coat and paint them.
Remove that damn rust coating crap from the font fender wells.
Paint fender wells.
Replace front hub factory length studs with extended APR studs.
Sure there is more once I get into it. So lets get started shall we!
Blast the old so called high temperature coating off the header....done 8)
Remove alcohol spray control since the car did not need it anymore.
F F made a killer catch can to take the alcohol bottles place under the hood, polish can.
Replace the old air filter intake pipe with a aluminum FF custom pipe, polish pipe.
Replace pods for both boost and exhaust temp gauges with new matching ones from Auto Meter.
Replace the cam cover, oil cap and COP plate with the one I bought from Frontline Fabrications.
Polished and install Avid Racing motor mounts.
Replace or repair then customize the coolant line from motor to radiator.
Cover the hole left behind from the spray nozzle on the intercooler piping, have piping chromed.
Remove front suspension pieces, powder coat and paint them.
Remove that damn rust coating crap from the font fender wells.
Paint fender wells.
Replace front hub factory length studs with extended APR studs.
Sure there is more once I get into it. So lets get started shall we!
Blast the old so called high temperature coating off the header....done 8)
Last edited:
