I'm changing set-ups so I'm pulling this cam out. It has 1500 miles on it and has zero issues, I just need a little smaller cam for what I'm doing. Had it in a 351W and it worked great. Choppy idle, lots of mid range torque and top end power.
Crane part number 364681 Solid mechanical cam.
Specs:
Duration 244/252 @ .050"
Lift .553"/570" with 1.6 Rockers
Lobe centers 105/111 degrees
Lobe separation 108 degrees
Nice cam for street/strip, oval racing, etc.
I have the cam, the lifters (ID'd to the lobes), and 351W hardened pushrods.
http://store.summitracing.com/partdetail.asp?part=CRN-364681&autoview=sku
$125 for all. Ready to go.
Crane part number 364681 Solid mechanical cam.
Specs:
Duration 244/252 @ .050"
Lift .553"/570" with 1.6 Rockers
Lobe centers 105/111 degrees
Lobe separation 108 degrees
Nice cam for street/strip, oval racing, etc.
I have the cam, the lifters (ID'd to the lobes), and 351W hardened pushrods.
http://store.summitracing.com/partdetail.asp?part=CRN-364681&autoview=sku
$125 for all. Ready to go.