Serp. belt on 4.6 w/ a kb

KENNEBELL2.6

KENNEBELL2.6

Forum Member
The belt on my car broke and I don't know and cannot remember how it went on there. There are 10 pulleys. Does anyone know where to find a diagram or know the correct size belt?
 
Doesn't KB have something on their website?? If not, talk to Sardeanie :thumbsup:

--Joe
 
I finally got the belt routing diagram. What a bitch trying to find the right belt. Anyone other than Dean on here with this set up?
 
KENNEBELL2.6 said:
I finally got the belt routing diagram. What a bitch trying to find the right belt. Anyone other than Dean on here with this set up?
Click to expand...

What do you need to know?? If you know the routing you are good to go, call Napa and get yourself a belt :thumbsup:

--Joe
 
I don't know the size and Lidio does not remember. Also I don't know if dean could help since he has a different (ati) dampner. He may be able to get me close though.
 
What is wrong with using rope like I suggested a while back......just remember the tensioner will be at full extension.

--Joe
 
That what Im gonna do tonight. Just being lazy and hoping to get lucky and get a part number. But no luck so far also the local parts store say I can't bring in a measurement to get a belt which I find hard to belive. Going home right now to mess with it. Thanks for the help though. Kody
 
KENNEBELL2.6 said:
That what Im gonna do tonight. Just being lazy and hoping to get lucky and get a part number. But no luck so far also the local parts store say I can't bring in a measurement to get a belt which I find hard to belive. Going home right now to mess with it. Thanks for the help though. Kody
Click to expand...

Tell the local auto parts store to get their head out of their ass... And if they can't do something that simple they need to go apply to Mickey D's to flip burgers...
 
ReiKo said:
Tell the local auto parts store to get their head out of their ass... And if they can't do something that simple they need to go apply to Mickey D's to flip burgers...
Click to expand...

He has a KB on his car....I highly doubt any autoparts store would know the correct belt length (no matter how smart they are).

--Joe
 
KENNEBELL2.6 said:
That what Im gonna do tonight. Just being lazy and hoping to get lucky and get a part number. But no luck so far also the local parts store say I can't bring in a measurement to get a belt which I find hard to belive. Going home right now to mess with it. Thanks for the help though. Kody
Click to expand...

soap said:
He has a KB on his car....I highly doubt any autoparts store would know the correct belt length (no matter how smart they are).

--Joe
Click to expand...
Read the red...
 
ReiKo said:
Read the red...
Click to expand...

Totally missed that :redface:

Kody, if you know the length of your belt you can give them a part number. For instance, most belts (Goodyear/Napa/Gates) use this system........

080810

Red = # of ribs (8 in this example)
Blue = length of belt (81.0" in this example)

If it was a 10 rib 105.5" belt the part number would be 101055

Get r done son!!

--Joe
 
Last edited:
No worries...


If you have the length and ribs... I'll give you the universal size for any store to use and it will pop right up...
 
You must log in or register to reply here.
Back
Top