SBF Twisted wedge Head repair needed

[Rod442]

I just got around to pulling the head form my motor (302), and the HG popped and burned through the fire ring in the gasket and started to make a small groove in the head between cylinders.

WHO do I take them to to have the one repaired, and both milled slightly. will need a little bit of welding where it has got a low spot in it, and then milled. Ill get both done to make sure they match. probably like 15 thou.

other than that the heads are fine, looking to do this to get the car running again as cheap as possible.

Thanks.

 

[1BADAIR]

our Pinks heads are getting fixed right now. I think modern is doing it

 

[dave89iroc]

I don't know of any out there , but any decent head shop can do it, welding and milling is a standard repair, and that sounds like an easy weld, not like a crack

I have used Greg's Cylinder Heads and Engines in Riverview, but thats a little bit of a hike from A2

 

[Rickety]

Who's Modern????

Razor(Livonia) for the head repair and ANY shop for the deck action.....

:rockwoot:

our Pinks heads are getting fixed right now. I think modern is doing it

 

[fastredgmc]

Ill fix them for you. I sent you a PM.

 

[NVR2FST]

Who's Modern????

Razor(Livonia) for the head repair and ANY shop for the deck action.....

:rockwoot:

I second Chris Razor...he fixed my TW heads and they needed a lot of welding.