SBF Pro Comp Aluminum Heads with Rockers, Pushrods, ARP bolts, and Tall Valve Covers

[90blknotch]

I have a set of Pro Comp aluminum heads for a SBF - I believe the 190cc version. These feature 2.02 intake and 1.60 exhaust valves and come with springs. The spring specs are as follows: 120lb seat pressure, 275lb at 0.500" lift, and max lift of 0.600". Trick Flow 6.300 .080 thick pushrods are included. The rocker studs are 3/8' and included are a set of 1.7 aluminum rockers with poly locks - I think these are summit brand. The valve covers are polished aluminum and are a tall design. They have a welded in breather and oil cap installed. Finally, a set of ARP head bolts are included - I am missing one of the short bolts and one of the step washers but it can be purchased seperatly from most performance shops. I got these heads with 1 bent intake valve - it has since been replaced and I lapped all of the valves to make sure none of the others were bent. I am looking to get $750 obo for all of this stuff.

Email [email protected] or call Sean at 734-260-0832.

 

[drw_walters]

will you sell just the heads no rockers or push rods? pm me a price

 

[chrisjr77]

i would buy the rockers and push rods if price is right....pm me and let me know alright sean thanks

 

[90blknotch]

Chris - kinda wanna keep the stuff together but I will let you know.

 

[P.F.M.]

Do you have yer phone near by?

 

[90blknotch]

I am in NYC for the weekend - give me a call anytime.

 

[rook]

ttt

 

[90blknotch]

sold