SBF parts

[Speedy]

Looking for some ported iron or out of the box aluminum heads. Also looking for a roller cam. This is all going on a stock 5.0 so nothing radical. Cam with .500 to .510 lift and 220/226 duration @50 would be great


Thanks
Mike

 

[Pwraddr]

You picknsomething up?

 

[tubbed85]

Mike you have a pm.

Thanks, John

 

[SVTSINR]

Looking for some ported iron or out of the box aluminum heads. Also looking for a roller cam. This is all going on a stock 5.0 so nothing radical. Cam with .500 to .510 lift and 220/226 duration @50 would be great


Thanks
Mike

pm sent...

 

[jameser]

Selling a E303 cam 498 lift 220 duration. $100 let me know

 

[Speedy]

You picknsomething up?

Yeah a 91 LX hatch. Typical 5.0 5 speed with some extra goodies

Thanks guys I'll go through my pm's later when I have time to look at things. Keep everything coming. I'm just trying to put the car into the 12's on motor. So any proven combos would be cool too.

TIA
Mike

 

[Pwraddr]

My old red car 92 coupe went 12.14 with the stock cam.

 

[Speedy]

My old red car 92 coupe went 12.14 with the stock cam.

Perfect! mind giving me your combo? Want to keep it pump gas so going to bump the compression up to about 10.5

 

[1nine84GT]

How much you looking to spend ? I have a fresh ( ready to drop In) , 351 windsor. never run,fired up or broken. In on the stand. If Intrested pm me a number and I will call you with all the details and price. randy

 

[adam351]

Perfect! mind giving me your combo? Want to keep it pump gas so going to bump the compression up to about 10.5

mike i have almost the same set up keith had and i might want to sell. i just dont have a cam for ya

 

[The Man]

how about going old school?
I have a Wolverine cam in great condition, looks like it was barely run. Do a quick google on it if your not familiar.

$75 obo.

 

[NOAVG5.0]

how about going old school?
I have a Wolverine cam in great condition, looks like it was barely run. Do a quick google on it if your not familiar.

$75 obo.

That is the cam i had in my 306 and went 11.80 n/a

 

[Speedy]

That is the cam i had in my 306 and went 11.80 n/a

Yeah I'll be calling you for that combo reeal soon. Pwraddr has a combo that I'm interested in too. It has to be real streetable pump gas car for sure. No nitrous but maybe a turbo LOL

 

[Speedy]

how about going old school?
I have a Wolverine cam in great condition, looks like it was barely run. Do a quick google on it if your not familiar.

$75 obo.

Im interested but not sure which one. The 1087 or a differnt grind?

 

[Pwraddr]

My junk would have been faster with more gear...only had a 3.73 with full interior and stock cam....well complete stock short block. Shifted at 5300 and would get 20 mpg and run 12.1X all day!!!

 

[The Man]

markings on the cam are wg8 961595

Specs

Wolverine / Blue Racer
WG1087
adv int dur 289°
adv exh dur 299°
int dur @ .050" 222°
exh dur @ .050" 232°
Int Valve lift 0.510''
Exh Valve lift 0.534''
Lobe center 112°

Im interested but not sure which one. The 1087 or a differnt grind?

 

[FoxbodyJr.]

aimmotorsports has an F cam that came outta my car. and prolly lots of other parts. you would be suprised with what he has. pm him

 

[Speedy]

markings on the cam are wg8 961595

Specs

Wolverine / Blue Racer
WG1087
adv int dur 289°
adv exh dur 299°
int dur @ .050" 222°
exh dur @ .050" 232°
Int Valve lift 0.510''
Exh Valve lift 0.534''
Lobe center 112°

Sounds like a nitrous cam with the 112 and being exhaust heavy. PM sent

 

[Speedy]

markings on the cam are wg8 961595

Specs

Wolverine / Blue Racer
WG1087
adv int dur 289°
adv exh dur 299°
int dur @ .050" 222°
exh dur @ .050" 232°
Int Valve lift 0.510''
Exh Valve lift 0.534''
Lobe center 112°

Rick I'll try to pick this up this weekend if your around. I'll give you a call after work tomorrow

 

[streetracin]

i have a set of tfs twisted wedge ,just milled them & value job,7/16 studs ,ill take$900 for them.