aimmotorsports
Forum Member
sbf parts, blocks, heads, and more update! 5-9-10
302, 5.0 XXX roller short block, compleate, ran when pulled from a '96 explorer, $100
'70s 302 short block, std bore, dissabled, $75
edelbrock performer cam, 302, good shape, used, $35
stock efi 5.0 distrubiter, like new msd cap and rotor, great shape, $40
stock 5.0 efi intake, upper and lower, good shape, stock tb included, $25
lightly ported e7 351 heads, $75
stock efi valve covers, good shape, $30 one set left
302 '70 DOoe small chamber heads, bare, stock, $60
'70s 302 heads, compleate, $30
302 hei style distrubiter, great shape wired for a msd box, $25
stock 8.8 with poly bushings, 2.73? gear $100
'86 fenders good shape, $40 ea
svo sail pannels, $75
'86 cluster, stock, $25
'87 cluster, stock, 85 mph, v8, $25
black gt tail lights from a '91, geat shape, $25
'87 dash assembly, good shape, dyed black, $65
stock seats, front and back, from a '87 notch back, blue, good shape, $50
2 decent 10 hole wheels, $40
5" ford racing memory recall tach, black face, $40
fox lx bumpers, rear, grey primer, $20
fox lx bumper, ft, blue, in good shape with cracked header pannel and lights, $45
'86 lx front and rear bumpers, good shape, $50 for front, $20 for rear
a9l ecu from my 5 speed notch, $100
efi wiring harness, compleate and un cut, '89 model mass air car with injector harness, $100
egr delete plate, 70mm, 3/8" thick with mount for cable, also egr simulator, $40
1/4 glass for '86 mustang, good shape, both sides, $15 ea
steering collum from '86 mustang with key, $25
good floor pans, $75 ea
'86 mustang insterment cluster, needs new lens or a good polishing?, $10
out dated latch style blue 5 pt harness, $10
aftermarket manual sunroof, $5
stock power rack, good shape, $35
stock power brake boster, good shape, i went to manual, $15 (i have 2)
'86 brake master cylinder, good shape, $10
t-top roof section with t-tops, good shape, no rust, $300
drivers side frame rail and strut tower, no rust, $100
passenger side strut tower no rust, $50
salen style wing for hatchback, good shape, i took it on trade, $100
lx wing, hatchback, $50
will consider trades for GOOD tools, windsor swap parts, 351w vic jr intake, or even a windsor motors, manual steering rack, c4 for sbf, turbo 350 for sbc, g body clipster headers, sbc motor plates, sbc parts, or??? for a fox body...
make offers, stuff needs to go soon!
302, 5.0 XXX roller short block, compleate, ran when pulled from a '96 explorer, $100
'70s 302 short block, std bore, dissabled, $75
edelbrock performer cam, 302, good shape, used, $35
stock efi 5.0 distrubiter, like new msd cap and rotor, great shape, $40
stock 5.0 efi intake, upper and lower, good shape, stock tb included, $25
lightly ported e7 351 heads, $75
stock efi valve covers, good shape, $30 one set left
302 '70 DOoe small chamber heads, bare, stock, $60
'70s 302 heads, compleate, $30
302 hei style distrubiter, great shape wired for a msd box, $25
stock 8.8 with poly bushings, 2.73? gear $100
'86 fenders good shape, $40 ea
svo sail pannels, $75
'86 cluster, stock, $25
'87 cluster, stock, 85 mph, v8, $25
black gt tail lights from a '91, geat shape, $25
'87 dash assembly, good shape, dyed black, $65
stock seats, front and back, from a '87 notch back, blue, good shape, $50
2 decent 10 hole wheels, $40
5" ford racing memory recall tach, black face, $40
fox lx bumpers, rear, grey primer, $20
fox lx bumper, ft, blue, in good shape with cracked header pannel and lights, $45
'86 lx front and rear bumpers, good shape, $50 for front, $20 for rear
a9l ecu from my 5 speed notch, $100
efi wiring harness, compleate and un cut, '89 model mass air car with injector harness, $100
egr delete plate, 70mm, 3/8" thick with mount for cable, also egr simulator, $40
1/4 glass for '86 mustang, good shape, both sides, $15 ea
steering collum from '86 mustang with key, $25
good floor pans, $75 ea
'86 mustang insterment cluster, needs new lens or a good polishing?, $10
out dated latch style blue 5 pt harness, $10
aftermarket manual sunroof, $5
stock power rack, good shape, $35
stock power brake boster, good shape, i went to manual, $15 (i have 2)
'86 brake master cylinder, good shape, $10
t-top roof section with t-tops, good shape, no rust, $300
drivers side frame rail and strut tower, no rust, $100
passenger side strut tower no rust, $50
salen style wing for hatchback, good shape, i took it on trade, $100
lx wing, hatchback, $50
will consider trades for GOOD tools, windsor swap parts, 351w vic jr intake, or even a windsor motors, manual steering rack, c4 for sbf, turbo 350 for sbc, g body clipster headers, sbc motor plates, sbc parts, or??? for a fox body...
make offers, stuff needs to go soon!
Last edited:
