SBF (331) Rocker Selection Help.

[allovru]

I’m in the process of putting my heads together for my Dart I/E 331 low compression block. The heads I will be using are AFR 185’s. I have yet to select a cam but I think I will end up buying an Anderson B41 cam (for a blower), I have yet to select the cam so Im not sure on what ratio roller rocker I will need.

My questions stem around what type of roller rocker should I buy? A couple NHRA friends recommended stainless steel rockers. They stated they may be a little heavier but there tolerances were generally a little better and they were stronger. This will be a street car that will see weekend recreational racing here and there.

What do you guys recommend?

Here are the rockers I have been looking at:

DSS Racing Aluminum Rockers:
http://www.dssracing.com/product_p/9000.htm

PRW Stainless Steel Roller Rockers:
http://www.andersonfordmotorsport.c...ategory_id=138&option=com_virtuemart&Itemid=1

PRW Aluminum Roller Rocker:
http://www.andersonfordmotorsport.c...ategory_id=138&option=com_virtuemart&Itemid=1

Trick Flow Aluminum Rockers
http://www.summitracing.com/parts/TFS-51400510/

Comp Cams Aluminum (Gold)
http://www.summitracing.com/parts/CCA-19043-16/

Any opinions on any of the above rockers would be greatly appreciated.

Thanks.

 

[Anthony]

ill have a set of stainless comp cams rockers for sale in a few weeks, 1.6, including ARP 7/16 studs. only reason i am changing is i got a really good deal on shaft rockers

 

[allovru]

PM me how much you are looking to get for them and when you are thinking you will be getting rid of them. I need some pretty quick.

 

[Rockwell]

TFS or Ford Racing even, I think any standard name product is an acceptable choice, I would steer clear of CAT and more junk related stuff....

 

[allovru]

Thanks Rockwell.. I def. wouldnt go with C.A.T I have heard horror stories of them coming apart.