SBF 302 hyd roller short block,$125.00 ..

Jacob

Forum Member
Stock bore and stock bearing size..Can still see cross hatch marks and no wrist pin play,really good short block..I bought it and planned to have the crank turned so I can replace the engine in my 91 LX 5.0 but got a good deal on a fully rebuilt short block..The crank is out because I was about to send it in until I got the new one..All caps are numbered and I numbered them as I took them off..
You can send the crank in (its not really bad but I would have it turned) then clean it up a little,put it together and go...

First $125.00 can have it..Only have 2 engine stands and about to have the 3rd engine out so need the stand..


 
Before anyone else trolls,please message me with questions that have nothing to do with this ad..
Feel free to check my past post and you'll see I just bought this engine not long ago..The engine in my car now is a 306,this one is a STD bore 302..
Like I stated in the OP..I bought this one to replace the bad one thats in the car now..Then I ended up getting a really good deal on a fully rebuilt 306 from a member here..I'll have 3 engines once I pull the bad one out and only 2 engine stands,need this one gone so I can use one of the stands..I have no reason to sale a bad engine to someone..Anyone can come by and i'll start my car so they know the bad engine is still in it..Thanks..
 
So are you coming to get it??
DID I EVER SAY I NEEDED ONE , also im not trolling your thread 302 s dont make power anyway, i was commenting because it looked like an older engine , sometimes people mix up balancers & flexplates with 50 oz and 28 oz which causes vibrations so i was guna offer up some input but you must know everything , GOOD LUCK !!!!!!!!!
 
Well my engine is ready to come out and needed the stand so had no choice but to put it on a card board box on the ground :( ..



Someone come get the short block and fully rebuilt E7 heads for $75.00 ..The heads are worth $75.00 and the block alone is worth $75.00,just want them out of here before it starts rusting and gos to my buddy for scrap..







 
Back
Top