s10 rear end problems

foxbodydave

foxbodydave

Club Member
a couple weeks ago i replaced the c clip on my pass side axle shaft. well last night the same clip broke again. i have not been beating on the truck for the most part, just been cruising. could there be something bent/tweaked that would cause this to keep happening? its an 83 s10 with the stock 10 bolt 3.73 rear. any input would be appreciated. thanks
 
ok i did some investigating and im leaning towards the cross pin being worn down or the side gears being worn. seems to be a common problem with the drum brake 10 bolts
 
no nothing. everything was smooth. drove the truck all day and was leaving mt clemens last night, went around a turn and noticed my axle about 8 inches out from my rearend.
 
when i put it all back together the first time everything was locked in and i rotated everything a few times with the dif cover off to check if anything was going on. everything seemed normal. the side gear is something ive read a few times about going bad. i found a complete rebuild kit for around 150 and it comes with everything i need.
 
You must log in or register to reply here.
Back
Top