s10 problems HELP PLEASE

[stroked10]

alright heres my delema i mocked my motor up with the stock swallen body mounts.and i knew that the front of the cab needed to come down once i put the bed on. well i put the new polyurethane mounts on and it dropped the cab on the trans. i didnt notice until i finished my brakes and put it on the ground.

what do i do? i took the motor out and was thinking of doing a motor plate to bring the motor down. cuz now i have solid motor mounts.but there is no way to mount the plates i have some but theres nothing to mount them too.

im to the point now that i wanna sell it its one thing after another.
I NEED HELP SOMEONE HELP ME.

 

[MyGreenZ]

It looks as if the only place interfering is the bellhousing of the transmission. Get a BFH (big F'n Hammer) and have at it. then recover it with that nice heat shielding you have and it wont look bad at all.

or you could cut that part out of the firewall and reweld a different piece in but i like the BFH idea better.

or

you could put spacers btwn the transmission crossmember and its mount but since you have solid mounts its probably not a good idea.

good luck.