RYELuo and 1badair

hehe you don't want to know. the cobra made 600 on a dyno jet and 520 on that mustang.
I picked up 103hp with the bottle pressure 200psi low on a 100 shot pulling 5 degree's of timing
 
Last edited:
SSunset said:
Put the 500 shot on it already.
Click to expand...

BOOM.bmp
 
My numbers are in my sig. For some reason it shows it only went up to 5800RPM so I guess it's a little lower than it should be..? My car is on a generic base type tune for the time being. Overall I actually ended up within 2hp of what I thought I was going to get, so not dissapointed but not overly happy either, haha.
 
1BADAIR said:
hehe you don't want to know. the cobra made 600 on a dyno jet and 520 on that mustang.
I picked up 103hp with the bottle pressure 200psi low on a 100 shot pulling 5 degree's of timing
Click to expand...

What jets in the kit? I'll bet you I can guess pretty damn close. Pulling 5 degrees I'll asume a 150hp jet?
 
Larry put the shame on my friends Whipple Cobra when be sprayed and got better #'s!! Thanks for killing his Ego now his head is back to normal size
 
it was 595 on a dynojet with just the whipple blower, and 650ish with the spray on a dynojey, all the work and tuning done on that cobra was done at Alternative ....then he made like 510 or something with just blower on seans Mustang Dyno...and that hurt his feelings:dontknow:
 
Yeah he said something about that there. I thought everyone knew Mustang dynos gave lower numbers.
 
RyeLou said:
My numbers are in my sig. For some reason it shows it only went up to 5800RPM so I guess it's a little lower than it should be..? My car is on a generic base type tune for the time being. Overall I actually ended up within 2hp of what I thought I was going to get, so not dissapointed but not overly happy either, haha.
Click to expand...
Time to spray the bitch!!!!!!!!!!!!
 
RyeLou said:
My numbers are in my sig. For some reason it shows it only went up to 5800RPM so I guess it's a little lower than it should be..? My car is on a generic base type tune for the time being. Overall I actually ended up within 2hp of what I thought I was going to get, so not dissapointed but not overly happy either, haha.
Click to expand...


Hey, maybe if you would have put your car on the dyno the right way you would have made better #'s :slap: IDIOT!
 
hehe I asked ryan how bad it torque steers when they were getting ready to run it. He was like uhh ohh I better warn them. On the second run sean was on the hoist next to the car and it almost knocked him off cause of the torque steer
 
You must log in or register to reply here.
Back
Top