Roush Supercharger I.D.

Prochrgd1

Forum Member
I picked up the attached supercharger from a friend thats moving out of state and was told its a "Roush Gen 5 M90-Eaton Supercharger". The stock pulley has been swapped to a smaller dia. for testing. The case has no serial numbers that I can see so I'm really stumped at nailing down the specifics. Can anyone indentify what I have here?

Background: The supercharger was purchased and tested on a prototype motor (non-automobile) and has less than an hour of run time.
 

Attachments

  • ROUSH.jpg
    ROUSH.jpg
    416.9 KB · Views: 135
  • elbow.jpg
    elbow.jpg
    245.7 KB · Views: 134
  • intake.jpg
    intake.jpg
    169.9 KB · Views: 134
Helluva friend:

http://www.roushperformance.com/parts/Mustang-Supercharger-M90-Kit-2010.html
Part #: 420023
Price: $5099.99 (USD



Description:
The Mustang Supercharger (M90), from ROUSH® adds big gains in power to your 2010 Ford Mustang. This M90 Supercharger Kit delivers 435hp and 400lb-ft at the flywheel and is now available for both manual and automatic transmission 2010 Ford Mustang 4.6, 3-valve V8 powertrain systems.

The 2010 Mustang M90 Supercharger Kit is protected by an industry-leading a 3 year / 36,000 mile drivetrain warranty, or one year warranty on ROUSH® components for Mustangs that are already past their warranty expiration date.

This Mustang supercharger kit belongs to a line of M90 superchargers developed by ROUSH that have set new standards for performance and reliability. This is the same line that has been used and proven for years in ROUSH-built vehicles and stood behind with the best warranty available.

The supercharger market has been rought with bad calibrations and packages that will set your engine to self-destruct. This is not the case with this 2010 Mustang M90 Supercharger Kit.

The primary components of this 2010 Mustang M90 Supercharger Kit include a ROUSH® M90 Roots-style supercharger, 73mm supercharger pulley (generating 5 PSI of boost), intake manifold, air-to-water intercooler system, and high-flow fuel injectors and induction system. To take this supercharger kit to the next level, we also include a special ROUSH calibration for this kit. ROUSHcharger owners simply need to ship their PCM unit to ROUSH® for the necessary calibration (overnight shipping is included for free). This 2010 Mustang M90 Supercharger Kit also features the ROUSH® logo.

Highlights:

Mustang Supercharger (M90)
Brings power of 2010 Mustang GT engine to 435 hp and 400 ft-lb
M90 ROUSHcharger with black finish
Works with 2010 Ford Mustang GTs with the 4.6L 3-valve V8 engine only
ROUSH® calibration
ROUSH® cold air intake system (air box cover and tube) to thermally isolate and increase power
Features ROUSH® logo
Wiring harness is plug-and-play for quick and easy install
E.O. (C.A.R.B.) pending
Covered by 3-yr/36,000-mi warranty (see ROUSH warranty for details)
Part #420023
 
Same info I gathered but cant find anything stating what specific years unless its 2010 exclusively as mentioned above.
I've got an 88' Procharged Notch and a TBSS so this is only a paperweight at the moment. I'll move it over to the for sale section and take the best offer.

Jake
 
that will prolly work with any roush or saleen lower intake, which they used on 4.6 2v's and then the 3v's in the newer stangs. that's just the bolt batter i'm basing that off of I dunno about the actual snout length or things like that. your best bet is to take it on a mustang forum, prolly corral would be your best bet, and list it there.
 
Back
Top