foxbodydave
Club Member
these heads do have a couple bent valves but i priced them out and itll cost less than 100 bucks to get new ones....and to whoever buys them i will regrind the seats and install the valves for free...these do come with crane roller rocker arms...arp 7/16 studs and comp cams guide plates.....450 obo..i need to sell today or tomarrow...either contact me here or call my house at 313-527-9428....these are the windsor sr's with 2.02-1.60 valves
http://www.worldcastings.com/prods_pages/053030.htm
Windsor Jr. & Windsor Sr. Small Block Ford 5.0 Cast Iron Cylinder Heads
Material: High density cast iron
Valve Seats: Integral intake, hardened steel exhaust
Valve Guides: Integral cast iron
Valve Spring Seats: Machined for 1.250/1.550" springs (stepped)
Valve Size: 1.940" (Windsor Jr.) or 2.020" (Windsor Sr.) x 1.600"
Rocker Arm Studs: Accepts 7/16" screw-in studs
Exhaust Flange: Stock port locations. Dual bolt pattern accommodates
large custom headers
Included In Base Assembly: Manley Street Flo (-1 models), or RaceMaster
(-2 models)) forged stainless steel valves with swirl-polished heads, ring &
band-style seals (-1/-2 models), valve springs, Manley 7° chrome moly retainers
Reommended Installation Items:
Rocker Arms: Aftermarket roller rocker arms recommended. However, if stock rockers are to be retained, use stud mounted rockers
Head Gaskets: Fel-Pro #9333PT (or #1011-2) or equivalent.
Caution: #1011-1 is NOT recommended.
Pushrods: Requires heat-treated pushrods.
Spark Plugs: Accepts 14mm 5/8" reach tapered seat Accel 276 or equivalent
Intake Gasket: Fel-Pro #90361 or equivalent
Exhaust Gasket: Fel-Pro #1415 or equivalent
http://www.worldcastings.com/prods_pages/053030.htm
Windsor Jr. & Windsor Sr. Small Block Ford 5.0 Cast Iron Cylinder Heads
Material: High density cast iron
Valve Seats: Integral intake, hardened steel exhaust
Valve Guides: Integral cast iron
Valve Spring Seats: Machined for 1.250/1.550" springs (stepped)
Valve Size: 1.940" (Windsor Jr.) or 2.020" (Windsor Sr.) x 1.600"
Rocker Arm Studs: Accepts 7/16" screw-in studs
Exhaust Flange: Stock port locations. Dual bolt pattern accommodates
large custom headers
Included In Base Assembly: Manley Street Flo (-1 models), or RaceMaster
(-2 models)) forged stainless steel valves with swirl-polished heads, ring &
band-style seals (-1/-2 models), valve springs, Manley 7° chrome moly retainers
Reommended Installation Items:
Rocker Arms: Aftermarket roller rocker arms recommended. However, if stock rockers are to be retained, use stud mounted rockers
Head Gaskets: Fel-Pro #9333PT (or #1011-2) or equivalent.
Caution: #1011-1 is NOT recommended.
Pushrods: Requires heat-treated pushrods.
Spark Plugs: Accepts 14mm 5/8" reach tapered seat Accel 276 or equivalent
Intake Gasket: Fel-Pro #90361 or equivalent
Exhaust Gasket: Fel-Pro #1415 or equivalent
Last edited: