roll cage

notch92408

notch92408

Club Member
i have a 6 point in my car now and i have the bars to make it a 10 point i have windshield out dash and seats what would somebody usually charge for this and who would do it on spare time thanks if intrested pm me a price and about how long thank you!!!
 
notch92408 said:
dont know how to cut bars to fit
Click to expand...

Angle grinder, course flap/sanding disc on grinder. I use a saw zall and get it to the general length, then grind the shape into the bar to mate up with teh bar it's going to be welded to. Done about 7 cars this way no issues. Takes a little practice, but once you get it it'seasy. They have those tube notch guides you can also buy from summit/jegs. If you can weld the rest is easy.

Few example pics. This was my car.
DSCF1581.jpg

DSCF1579.jpg
 
Last edited:
Here is pic of my work, a 25.5 S10 that will run Milans all motor class, done a quite few 25.2 & 25.3 cars also, Everything I do is CM and custom bent in case something you have doesnt fit good enough. Ill send you a PM with a price....couldnt get the picture to post without a link.
 
Last edited:
S&W makes a nice fit cage threw or around the dash. Wolfe makes a really nice cage as well. Just what you want to spend. And if you need any help let me know have done 5 cages.
 
i have a 6 to 10 point add on kit sitting in my garage collecting dust. its ms and is for 87 thru 93 - 50.00 come get it
 
Team Z Motorsports said:
We will have cage kits in about 2-3 week!
Click to expand...

specs please?
will this be like wolfe's kit where you can have it precut, notched and scribed?
will there be a DOM option?
I imagine this will work hand in hand w/you thru the floor subframe connectors?
can you give pricing now or will we have to wait?

Thanks
 
siLversLeigh said:
specs please?
will this be like wolfe's kit where you can have it precut, notched and scribed?
will there be a DOM option?
I imagine this will work hand in hand w/you thru the floor subframe connectors?
can you give pricing now or will we have to wait?

Thanks
Click to expand...
bill , we used a s&w kit in my car , its great stuff when you buy a notched kit you will still have to notch one end of a few of the bars ...
we used a china freight notcher and a few good quality hole saws...
 
Last edited:
i did all mine it looks great my first time ever doing one using a harbor freight notcher and a really good hole saw. its easy as long as you can weld.
 
bigg said:
bill , we used a s&w kit in my car , its great stuff when you buy a notched kit you will still have to notch one end of a few of the bars ...
we used a china freight notcher and a few good quality hole saws...
Click to expand...

Both S&W kits i've put in were pretty nice. Little trimming here and there, and they have gthe nicest rear down bars of all the kits IMO.
 
You must log in or register to reply here.
Back
Top