RC trucks

Last time I flew the revo it cost $155 bucks. hahahaha Are you sure you want me to fly anything of yours. hehe This could get dangerous and expensive.
 
the cx2(red) and the mcx(yellow) are trainers
24499234f571f95.jpg
 
Last edited:
Damn you have 3 of them? I thought I was out of control when I had 3 Rc's at one time. hehe I did see a used revo with a pico motor for $350. I almost went back in to ask about it. But with spring time just around the corner. The stang needs new rears so I just walked away. It is still there I check monday. lol
 
I still have an rc10gt, XXt, Lxt(paved oal), rc10ls, rc10t2 , rc10t from when I used to race.
the red and yellow heli are cheap
 
this is how you do it. for some reason his collective(left stick) is backwards. Up is neg pitch and down is postive pitch
[ame="http://www.youtube.com/watch?v=20_VQoD8cz0"]YouTube - Lukas RIVA[/ame]
 
Here's my LST2. I'll have to snap some pics of the Jammin X1CRT truggy and X1CR buggy.
the-Ripper-007.jpg

the-Ripper-006.jpg

the-Ripper-005.jpg

the-Ripper-004.jpg

The-Ripper-003.jpg

The-Ripper-002.jpg

The-Ripper-001.jpg


Here's my 2 wheelers, B44 and a Lazer ZX5 SP

LazerZX-5SPoldpaintjob.jpg

P1010019.jpg

B44andLazerZX-5SP-1.jpg

B44andLazerZX-5SP.jpg

P1010021.jpg

LazerZX-5SPnewpaintjob.jpg

B44.jpg

LazerZX-5SP.jpg
 
Last edited:
Who, Racers Edge? No not really but those guys (Racers Edge) come over every Friday in the summer and run the track at my house. We race indoors together up at a track in Odgen, I'll get ya a vid :)

<object width="480" height="295"><param name="movie" value="http://www.youtube.com/v/ZQNmHIer8DY&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/ZQNmHIer8DY&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="295"></embed></object>

I started 3rd in the A main in this vid worked up too 2nd aand Todd was gone in 1st. I fubared went way back and worked back up into 3rd place where I finished.

...Um I might be working there very soon, I'll hear the out come of a meeting that went down today with Lee the owner and Scott the head of sales.
 
Last edited:
You must log in or register to reply here.
Back
Top