qa1 tubular k member install

I am giving this set-up one more chance, just because everything else fits ok now. If it doesnt work does anyone know someone with a coil-over kit and some caster camber plates they want to get rid of?
 
SLOBERT65 said:
I am giving this set-up one more chance, just because everything else fits ok now. If it doesnt work does anyone know someone with a coil-over kit and some caster camber plates they want to get rid of?
Click to expand...

i have half a coil over kit, got the springs, sleeves, just needs the top retaining caps and thrust bearings.....
 
Big thanks to Team Z!!! Fast service and great prices. Hopefully be able to see some of you guys out there this spring.
 
I have to QA1 front setup installed with coil overs. Everything seemed to fit & line up good and the only funky thing was grinding down the back bolt for the front control arms.

I bought a used set of bolts from ebay for around $20 so I had some extra tries in case I totally F'd up. The first bolt took a little while because I was doing the measure twice / cut once approach.

One I had the first working example done, getting the other one ground to match was cake.

Granted, I haven't driven the car yet because the motor is out, but it all seemed to go together well.

Also, I used 98 front spindles to convert to 5 lug and a pair of bushings from AFCO so the spindle + ball joint fit together properly.
 
You must log in or register to reply here.
Back
Top