Post a picture of your latest purchase.

[JoeP.]

^^Nice!^^ What are your plans for it Denny?

 

[DeFormula]

Cool Denny!

 

[4Gas$]

That looks like a lot of fun Denny!

 

[AutoRoc]

Thanks guys, it looks fun... I'll run it at sand drags and maybe some asphalt stuff. It has a 4.88 9" Rear. Definitely need to find a powerglide. Might do a junkyard LS with a cam so I'll be on the lookout for LS stuff, carb, intake, ignition. I'm just looking to go rounds bracket racing.

 

[Golden]

Sand drags.....YES! Awesome!

 

[JoeP.]

I picked up this 34k mile 1974 Javelin AMX to keep my 1970 AMX company. 360 4 barrel close ratio T10 4 speed. I'll clean it up and keep it as stock as possible.
IMG_20210423_114109 by Joe Pinsoneault, on Flickr

 

[Golden]

Cool Javelin! I’ve always liked those. Where did you find it? A guy in Milan used to have a maroon one a good 20 years ago. 4gas$ may remember it, the guy lived off of Platt south of Main Street.

 

[JoeP.]

Thanks, it was a C/L find out in Butler, PA. I had a few of these cars back in the 90's and always wanted a nice original one. I raced a 1971 Javelin in the NMCA/NSCA and at the first Milan heads up races.
jp_launch_x by Joe Pinsoneault, on Flickr

 

[Golden]

Nice! They’re definitely cool, and special to see one in the wild,

 

[4Gas$]

My youngest son's middle name is "Javlin". Yes named after the car
and yes spelled different intentionally.

 

[mustangmike6996]

Re-redoing the interior in my 69 Mustang. Going to reupholster the Mach1 seat frames I picked up last year. Went with TMI full interior and premium cushions/foam.

 

[4Gas$]

^^^ Those are gonna look great in the 69!

 

[mustangmike6996]

^^^ Those are gonna look great in the 69!

Thanks. I added a center console and will be adding the full door panels (minus wood grain). So it'll look like a higher optioned standard interior.

 

[4Gas$]

Nice, I always like your 69 Mustang!

 

[H.O. Driver]

$30 Amazon foam cannon, works awesome, but definitely needs a bigger power washer for best results. Filled 3/4 with water and added 1oz of Meguiars shampoo. Still was half full after washing the lawnmower, rubber floor mats and the car.

Sent from my Pixel 4 using Tapatalk

 

[mustangmike6996]

I have a similar foam cannon, I haven't used it yet. I do have that model Ryobi pressure washer. Its been a workhorse, well worth the money.

 

[Golden]

I have an MATCC cannon from Amazon. Works very well, produces shaving cream like foam. Chemical guys makes some decent products, but their soaps are very good. Their snow foam is nice. I’ve also had great foam with 3D Pink.

If you’re looking for a new drying towel, Griots PFM is where it’s at. It will dry that Yukon without being wrung out.

https://www.griotsgarage.com/product/pfm+terry+weave+drying+towel.do

 

[Golden]

Bought a Grilla Silverbac Alpha wood pellet grill. A big plus is that they’re a Michigan company out of Holland. I ordered it on a Tuesday at 6:30pm, they called me the next day to inform me that they would deliver it Thursday. So in about 40 hours the grill was in my garage delivered by Grilla themselves.

Sent from my iPhone using Tapatalk

 

[H.O. Driver]

I have an MATCC cannon from Amazon. Works very well, produces shaving cream like foam. Chemical guys makes some decent products, but their soaps are very good. Their snow foam is nice. I’ve also had great foam with 3D Pink.

If you’re looking for a new drying towel, Griots PFM is where it’s at. It will dry that Yukon without being wrung out.

https://www.griotsgarage.com/product/pfm+terry+weave+drying+towel.do

I will have to look into those, I pulled my chamois towels out and they needed a good washing. So I had to resort to our microfiber bath towels, wife wasn't pleased....lol

Sent from my Pixel 4 using Tapatalk

 

[jsxtreme]