mustangmike6996
Club Member
Im 99% sure I will be doing a FiTech conversion, I just need to pull the trigger and toss some cash down.
Post a picture of your latest purchase.
- Thread starter lucky7
- Start date
Im 99% sure I will be doing a FiTech conversion, I just need to pull the trigger and toss some cash down.
AutoRoc
Club Member
Sent from my SM-G950U using Tapatalk
Sweeeeeeet. Those pillowtop grips look worthwhile. Do you know much about those bikes? I followed a vlog on advrider.com about 2 chicks that rode to south america on matching drz400's... Only real issue they had was after high rpm highway riding. The crankcase doesnt hold much oil and it gets frothed/misted out of the breather tube at high rpms... One ran out of oil and toasted the cams/bearings....
Last edited:
MarkVIII93
Forum Member
A little bit. I wanted another rmz but also wanted to be able to ride anywhere. Never heard of oil starvation on them. They do have a unique semi-dry sump system though. I've got an extra set of wheels and tires to do some trail riding but it will likely just be the warm month work commuter.
Sent from my SM-G950U using Tapatalk
BrainFearGone
Forum Member
Tin
Club Member
Four of these in 120GB
Couple more of these, will have four total
This guy
And a couple of these
Spinning up a new VM host box. Still debating on whether to run ESXi or Proxmox VE. Either way, I'll run most apps in Docker containers for quick deployment and backup. Docker containers will be Plex, NZBGet, Sonarr, Radarr, nginx, OpenVPN, and a Pi-Hole DNS ad blocker.
Couple more of these, will have four total
This guy
And a couple of these
Spinning up a new VM host box. Still debating on whether to run ESXi or Proxmox VE. Either way, I'll run most apps in Docker containers for quick deployment and backup. Docker containers will be Plex, NZBGet, Sonarr, Radarr, nginx, OpenVPN, and a Pi-Hole DNS ad blocker.
mustangmike6996
Club Member
Replaced my work bench with a new box
Sent from my XT1635-01 using Tapatalk
Sent from my XT1635-01 using Tapatalk
mustangmike6996
Club Member
Ford Racing Hurst shifter for the 1969 Mustang T5 swap.
Sent from my XT1635-01 using Tapatalk
Sent from my XT1635-01 using Tapatalk
twotwoturbo
Club Member
1962 Impala 283 powerglide car...
Needs paint and body work...
twotwoturbo
Club Member
were is everybody at!?
93calypsohatch
Club Member
mustangjoe87
Forum Member
I dont know which truck I like better in that pic, they both look clean.
here is the pic for you too
<blockquote class="imgur-embed-pub" lang="en" data-id="B9QZY6I"><a href="//imgur.com/B9QZY6I"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>
here is the pic for you too
<blockquote class="imgur-embed-pub" lang="en" data-id="B9QZY6I"><a href="//imgur.com/B9QZY6I"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>
Last edited:
93calypsohatch
Club Member
I drove the powerstroke home from Portland in October. Picked up the Typhoon in Maryland a few weeks ago
4Gas$
Club Member
93calypsohatch
Club Member
Ken already knows about it
It's 1 of 28 Aspen blue 92 Typhoons #0457, all stock and will probably stay like that for a bit
93calypsohatch
Club Member
I brought this back from Washington same time I got the powerstroke
https://i.imgur.com/nbQAzb1.jpg
5 of us got a one way flight to Seattle and brought back 8 vehicles
https://i.imgur.com/nbQAzb1.jpg
5 of us got a one way flight to Seattle and brought back 8 vehicles
4Gas$
Club Member
