Parts for Degreeing Cams in Ford Mod Motor

[JScottGT]

Does anyone have a solid lifter & cam degree wheel I can borrow to get my camshafts degreed in? I am installing a new set of cams (Thanks to BossJohnny) with adjustable cam gears and want to make sure they are centered properly. I can have them back to you after this weekend.

Thanks in advance.

 

[TRBOBUICK]

Does anyone have a solid lifter & cam degree wheel I can borrow to get my camshafts degreed in? I am installing a new set of cams (Thanks to BossJohnny) with adjustable cam gears and want to make sure they are centered properly. I can have them back to you after this weekend.

Thanks in advance.

What year heads and cams ?

 

[JScottGT]

2000 PI heads
Comp XE270AH-13 Cams

 

[Scooter70]

:secret:

 

[STOCK GT]

Does anyone have a solid lifter & cam degree wheel I can borrow to get my camshafts degreed in? I am installing a new set of cams (Thanks to BossJohnny) with adjustable cam gears and want to make sure they are centered properly. I can have them back to you after this weekend.

Thanks in advance.

x2
Id like to degree my Factoy Cams, they tend to be off a few degrees form the factory...

 

[myslow2002gt]

I have a set. If you want, I can head over to the shop in the next day or so to get them for you.

 

[STOCK GT]

ttt

 

[Boomer!]

Does anyone have a solid lifter & cam degree wheel I can borrow to get my camshafts degreed in? I am installing a new set of cams (Thanks to BossJohnny) with adjustable cam gears and want to make sure they are centered properly. I can have them back to you after this weekend.

Thanks in advance.

You do not need a solid lifter. You can use the soft/test springs in most degree kits. I also have the OTC tool to remove the springs with the head on the car.

FWIW you may want to reconsider using adjustable gears if they are made by comp cams or fidenza they are known to have come loose and cause engine failures.

Let me know if you need a hand I have done a few of them..

 

[JScottGT]

I'd be willing to be those failures were from people who neglected to use the supplied loctite on all the fasteners and torque them properly.

 

[STOCK GT]

The Factory Cam Gears can be adjusted, whats the purpose for aftermarket?