NOS question

quickstang1983

quickstang1983

Club Member
Can you mix NX solenoids with a NOS brand cheater plate??
I wanna make sure of this before I piece things together. Thanks, Jake
 
check orifface size for a starting tune then you should be careful for flow rates on each solenoids vs plate don't go below min rated plate shot cause you could end up with very uneven distribution(amount of holes in plate bleeding nitrous pressure off before it gets all the way across the plate) I talked to wilson proflow about this and thats where I came up with this info so I am not just pulling it out of my ass.
 
THOR84GT said:
check orifface size for a starting tune then you should be careful for flow rates on each solenoids vs plate don't go below min rated plate shot cause you could end up with very uneven distribution(amount of holes in plate bleeding nitrous pressure off before it gets all the way across the plate) I talked to wilson proflow about this and thats where I came up with this info so I am not just pulling it out of my ass.
Click to expand...

Thanks. I'm not sure what to do now damnit.
 
I'm just gonna hold off for a while I guess. I should probably just wait till next year before I put any more money into my car. I have the nitrous itch now which is the bad part LOL! I'm an addict and I don't even have a kit yet!
 
quickstang1983 said:
I'm just gonna hold off for a while I guess. I should probably just wait till next year before I put any more money into my car. I have the nitrous itch now which is the bad part LOL! I'm an addict and I don't even have a kit yet!
Click to expand...

just do it, quit comin up with excuses, you know you wanna spray the car so just do it!
 
quickstang1983 said:
I do wanna spray it, but I don't wanna be too stupid with the money spending right now. I owe some money to some people. I don't need my legs broken LOL!
Click to expand...

jus take a couple bux outta each check and save up for it. im just givin you a hard time, but ya need to quit worryin so damn much! :buds::bondage:
 
nickgregg2007 said:
jus take a couple bux outta each check and save up for it. im just givin you a hard time, but ya need to quit worryin so damn much! :buds::bondage:
Click to expand...

Any extra cash I get I have to pay back to my parents'. I'm not worrying, I just want the spray like a mofo!!


My dad was gonna try and get the powdercoating gun working right and then i'll contact you if it works ok. :thumbsup:
 
My dad was gonna try and get the powdercoating gun working right and then i'll contact you if it works ok. :thumbsup:[/QUOTE]

ok cool!
 
Jake if you are just going to wait and save up I suggest using an edelbrock kit. They seem to be a little nicer for the same money as other kits I've used in the past.
 
THOR84GT said:
Jake if you are just going to wait and save up I suggest using an edelbrock kit. They seem to be a little nicer for the same money as other kits I've used in the past.
Click to expand...

i know 2 people with edelbrock plate kits and they both burned shit up, they both went to a big shot plate and now run fine. dont know if it was a freak thing or what, but it happened on 2 diff cars i know of
 
we have a nx kit on jordans car the tune up is a lot different than a nos kit,it has a smaller fuel jet than nitrouis jet,so it needs more fuel pressure,they say 10psi is safe 8 is very lean.i run my nos kit at 6psi and it seems safe.
 
yeah joe didn't know thats what that kit called for I set jordan's pressure at 6 1/2-7psi that was flowing pressure too
 
Last edited:
that would be the reason I don't care for nx plate kits they change the jetting around and fuel pressure around too much from every other manufacture
 
THOR84GT said:
that would be the reason I don't care for nx plate kits they change the jetting around and fuel pressure around too much from every other manufacture
Click to expand...

yea im sure its for that purpose though so their stuff is one off and so you have to buy their stuff
 
NOSBigShot said:
we have a nx kit on jordans car the tune up is a lot different than a nos kit,it has a smaller fuel jet than nitrouis jet,so it needs more fuel pressure,they say 10psi is safe 8 is very lean.i run my nos kit at 6psi and it seems safe.
Click to expand...

So I should be setting my pressure at around 6psi???
 
You must log in or register to reply here.
Back
Top