STENOD
Club Member
We recently installed a Mustang Chassis Dyno!<?xml:namespace prefix = o /><o
></o>
<o></o>
MD-1100-SE Equipped with the following:<o></o>
<o></o>
Above ground hoist<o></o>
2500 RWHP capable<o></o>
Center pull down for added traction (High HP cars)<o></o>
Dual wideband 02 sensors<o></o>
Boost pressure sensor<o></o>
Fuel Pressure sensor<o></o>
Inductive RPM pick-up. TS1, and OBD II RPM pick-ups.<o></o>
OBD II scanning (can log Timing, throttle position, just about anything the factory car scans)<o></o>
<o></o>
All important items to guarantee our new customers the highest quality in tuning.<o></o>
<o></o>
Check out the newest toy..
<o></o>
<o>
</o>
<o></o>
<o></o>
<o></o>
<o></o>
<o></o>
<o></o>
<o></o>
<o></o>
<o>
</o>
<o></o>
<o></o>
<o>
</o> <o></o>
<o></o>
With the installation of this dyno, we are going to get back to what we originally started building, bad ass street cars. Our goal is to provide the best possible street and race tunes needed for your car or truck. By no means are we going to stop from building the one off race cars, custom turbo kits or roll cages we have done in the past, this will still be a big part of our company. But, with the addition of the chassis dyno, we now have the capability to dyno tune the cars we have built. We have added the necessary software to the shop to be able to assist you guys with your tuning needs. Whether it is as simple as adding a Diablosport predator tune to your daily driver Chrysler 300 or flashing a tune into your APS Twin Turbo on your corvette ZO6. We want to get back to helping out some of the smaller jobs in the performance industry as well as the bigger ones. Just another step in becoming a one-stop shop. <o></o>
<o></o>
<o></o>
Please call us for Tuning prices, as all the different family of vehicles can differ in price depending on what we use for software. For the Ford and Chrysler products, we will be using Diablosport tuning software (CMR). Each tune will also yeild a Diablosport predator for the customer to take home and be able to use if he or she desires. For the GM vehicles, we will be using HP Tuners and Diablosport. We will also be able to help out customers with aftermarket Engine control systems, Big Stuff 3, Fast, Accell, AEM. <o></o>
<o></o>
See below for a list of just some of the vehicles we can tune:<o></o>
<o></o>
GM vehicles:
Camaro
Trans-am
Formula
GTO
G8
Corvette
Trailblazer SS
SUV / Truck (Silverado, escalade)
SSR Pickup
CTS-V
Hummer
STS-V
XLR-V
Duramax Trucks
Ford Vehicles:
List to come shortly, Call for applications.
Chrysler Vehicles:
Viper<o></o>
300 Hemi
300 SRT-8 Hemi
Magnum Hemi
Charger Hemi
Charger SRT-8 Hemi
Challenger
Challenger SRT-8
Ram Diesel Trucks
and growing...<o></o>
<o></o>
(Don’t see your car or truck? Call Stenod and see if we can assist you in your tuning needs 248-307-0056)<o></o>
<o></o>
Along with our custom tuning abilities, I will also be offering the dyno to those that like to tune their own vehicle. We will be offering dyno time by the hour for rental. Along with renting out the dyno, I will have one of my employee’s help you guys strap the car down, back the car on the dyno as well as hook up the necessary monitoring equipment you would like to use. Also, that individual will run the chassis dyno for you; all you have to do is tune the car the way you want. Pricing for this will depend on the amount of time you need to use the dyne. Please call and check availability of time and schedule an appointment.<o></o>
<o></o>
Don’t need your car dyno tuned and you just want to see how much massive horsepower it makes? come by for $75.00 and get three power pulls. About 15 minutes between pulls for cooldown will be allowed if you would like. I will attach the wideband A/F meter if you would like for an additional $25.00. <o></o>
<o></o>
Check out our website for news and updated info on cool projects that run across the dyno in the coming months. <o></o>
<o></o>
Stenod Performance<o></o>
www.stenodperformance.com<o></o>
248-307-0056<o></o>
248-307-0059 Fax<o></o>
></o><o
></o>MD-1100-SE Equipped with the following:<o
></o><o
></o>Above ground hoist<o
></o>2500 RWHP capable<o
></o>Center pull down for added traction (High HP cars)<o
></o>Dual wideband 02 sensors<o
></o>Boost pressure sensor<o
></o>Fuel Pressure sensor<o
></o>Inductive RPM pick-up. TS1, and OBD II RPM pick-ups.<o
></o>OBD II scanning (can log Timing, throttle position, just about anything the factory car scans)<o
></o><o
></o>All important items to guarantee our new customers the highest quality in tuning.<o
></o><o
></o>Check out the newest toy..
<o
></o><o
>
><o
></o><o
></o><o
></o><o
></o><o
></o><o
></o><o
></o><o
></o><o
>
><o
></o><o
></o><o
>
> <o></o><o
></o>With the installation of this dyno, we are going to get back to what we originally started building, bad ass street cars. Our goal is to provide the best possible street and race tunes needed for your car or truck. By no means are we going to stop from building the one off race cars, custom turbo kits or roll cages we have done in the past, this will still be a big part of our company. But, with the addition of the chassis dyno, we now have the capability to dyno tune the cars we have built. We have added the necessary software to the shop to be able to assist you guys with your tuning needs. Whether it is as simple as adding a Diablosport predator tune to your daily driver Chrysler 300 or flashing a tune into your APS Twin Turbo on your corvette ZO6. We want to get back to helping out some of the smaller jobs in the performance industry as well as the bigger ones. Just another step in becoming a one-stop shop. <o
></o><o
></o><o
></o>Please call us for Tuning prices, as all the different family of vehicles can differ in price depending on what we use for software. For the Ford and Chrysler products, we will be using Diablosport tuning software (CMR). Each tune will also yeild a Diablosport predator for the customer to take home and be able to use if he or she desires. For the GM vehicles, we will be using HP Tuners and Diablosport. We will also be able to help out customers with aftermarket Engine control systems, Big Stuff 3, Fast, Accell, AEM. <o
></o><o
></o>See below for a list of just some of the vehicles we can tune:<o
></o><o
></o>GM vehicles:
Camaro
Trans-am
Formula
GTO
G8
Corvette
Trailblazer SS
SUV / Truck (Silverado, escalade)
SSR Pickup
CTS-V
Hummer
STS-V
XLR-V
Duramax Trucks
Ford Vehicles:
List to come shortly, Call for applications.
Chrysler Vehicles:
Viper<o
></o>300 Hemi
300 SRT-8 Hemi
Magnum Hemi
Charger Hemi
Charger SRT-8 Hemi
Challenger
Challenger SRT-8
Ram Diesel Trucks
and growing...<o
></o><o
></o>(Don’t see your car or truck? Call Stenod and see if we can assist you in your tuning needs 248-307-0056)<o
></o><o
></o>Along with our custom tuning abilities, I will also be offering the dyno to those that like to tune their own vehicle. We will be offering dyno time by the hour for rental. Along with renting out the dyno, I will have one of my employee’s help you guys strap the car down, back the car on the dyno as well as hook up the necessary monitoring equipment you would like to use. Also, that individual will run the chassis dyno for you; all you have to do is tune the car the way you want. Pricing for this will depend on the amount of time you need to use the dyne. Please call and check availability of time and schedule an appointment.<o
></o><o
></o>Don’t need your car dyno tuned and you just want to see how much massive horsepower it makes? come by for $75.00 and get three power pulls. About 15 minutes between pulls for cooldown will be allowed if you would like. I will attach the wideband A/F meter if you would like for an additional $25.00. <o
></o><o
></o>Check out our website for news and updated info on cool projects that run across the dyno in the coming months. <o
></o><o
></o>Stenod Performance<o
></o>www.stenodperformance.com<o
></o>248-307-0056<o
></o>248-307-0059 Fax<o
></o>
Last edited:
(yes we dyno'd the spree!:buds
