kewldude007
New member
Looking into that, I'm seeing promising leads.
New member, son of old member (postban) saying hi, also questions
- Thread starter kewldude007
- Start date
Looking into that, I'm seeing promising leads.
AutoRoc
Club Member
Welcome!!!
Turbocharge that 3.7. It's been done and works well enough to get 400hp with around 8psi. lime-swap.com can flash a turbo tune on your factory PCM, he is local here in SE Michigan.
60lb injectors
Lime-swap.com tune
Turbo exhaust manifold
cold side piping
intercooler of some sort
oil feed fitting
oil drain fitting in the upper oilpan area
55-60mm turbo
Wastegate with low boost springs(5-10psi)
cheap manual boost controller
Blow off valve
Boost guage
There will be some welding here and there for the hot side exhaust parts, the cold side can be welded steel tubing or aluminim or you can piece it together with silicone couplers.
EZ PZ!!! haha
Turbocharge that 3.7. It's been done and works well enough to get 400hp with around 8psi. lime-swap.com can flash a turbo tune on your factory PCM, he is local here in SE Michigan.
60lb injectors
Lime-swap.com tune
Turbo exhaust manifold
cold side piping
intercooler of some sort
oil feed fitting
oil drain fitting in the upper oilpan area
55-60mm turbo
Wastegate with low boost springs(5-10psi)
cheap manual boost controller
Blow off valve
Boost guage
There will be some welding here and there for the hot side exhaust parts, the cold side can be welded steel tubing or aluminim or you can piece it together with silicone couplers.
EZ PZ!!! haha
