OIF1VET
Forum Member
Hey all, just signed up today, Vos referred me to the site. I am retired Army(22 years) and currently work as a machinist/setup guy for a small shop. I have a 2002 WS6 with many mods.. I do most of my own work on the car, except the nitrous install(let the pros do that).. Car is currently in the shop having a chromemoly 8 point installed and painted to match the car, also 5 point harnesses and some paint and 1 body mod. I can't disclose the paint/body mod as I'm keeping it a secret til complete(plus Larry would read this and tell everyone on mifbody..lol) I've ran a best of [email protected], hoping to dip into the low 11's next year, if my ten bolt survives long enough..
Here's the mods that have been done so far:
Factory Options:
T-Tops, leather interior, Power drivers seat w/lumbar, A/C, PW, PDL, remote entry, CC, Traction Control(Always turned OFF), Power Antenna, Tilt wheel
Exterior Modifications:
American Flag Phoenix and PONTIAC letters on front. Trans Am Door emblems(Changed out for Black), PONTIAC rear letters Black, Custom Tail panel painted Silver metallic chameleon, all side trim removed.. Carbon Fiber WS6 badge(Changed out the red one) Window tint, Mirrors on the underside of Hood, Chrome fuse box and PCM cover, WS6 mirror on A/C condensor, MBA billet caps, dipstick and Master cylinder cover, polished valve covers, Coil packs relocated under cowl, side trim removed
Interior Modifications:
-Autometer lean/rich gauge
-Auto Meter Digital tach w/shiftlight
Performance:
-Nitro Dave 78 MM Plate system w/bottle heater and dual digital window switch
-Ed wright power tuning/Bullseye PCU
-Extreme comp cam
-Titanium valves, springs and pushrods
- Yella Terra Roller Rockers
-30Lb injectors
-MTI Ported throttle body
- Carbon Fiber lid
-ASP pulley
-10.4 mm plug wires
-SLP high flow radiator
-160 degree thermostat
-Mallbro 255 inline fuel pump
-JAAM Ram Air kit
-SLP long tube headers ceramic coated
-3" ORY
-Mufflex 4” exhaust
-DMH Low Profile Dual electric exhaust cutouts
Suspension/Chassis:
-18” Budnik rims
-15" Summitt Star rims for the track
-Q.A.1 springs
-Q.A.1-12 way adjustable shocks Rear
-Q.A.1 -12 way adjustable Shocks revalved as an "R" series on the front
-SLP subframe connectors
-Adjustable panhard rod
-Upper panhard rod
-BMR lower control arm relocation brackets
-BMR Chrome moly tubular adjustable lower control arms
-Spohn Tunnel mount adjustable torque arm w/safety loop
-Spohn anti roll pro series rear sway bar
Drivetrain:
-TCI built transmission
-B&M large tranny pan
-Vigilante 3200 RPM stall converter
-Carbon fiber driveshaft
-3:73 gears with rearend girdle
Electronics:
-Alpine cd player
-MB quart comp mids and highs
-Eclipse pro sub woofer
-Xtant amp
-MB Quart crossovers
-Python Alarm
Here's the mods that have been done so far:
Factory Options:
T-Tops, leather interior, Power drivers seat w/lumbar, A/C, PW, PDL, remote entry, CC, Traction Control(Always turned OFF), Power Antenna, Tilt wheel
Exterior Modifications:
American Flag Phoenix and PONTIAC letters on front. Trans Am Door emblems(Changed out for Black), PONTIAC rear letters Black, Custom Tail panel painted Silver metallic chameleon, all side trim removed.. Carbon Fiber WS6 badge(Changed out the red one) Window tint, Mirrors on the underside of Hood, Chrome fuse box and PCM cover, WS6 mirror on A/C condensor, MBA billet caps, dipstick and Master cylinder cover, polished valve covers, Coil packs relocated under cowl, side trim removed
Interior Modifications:
-Autometer lean/rich gauge
-Auto Meter Digital tach w/shiftlight
Performance:
-Nitro Dave 78 MM Plate system w/bottle heater and dual digital window switch
-Ed wright power tuning/Bullseye PCU
-Extreme comp cam
-Titanium valves, springs and pushrods
- Yella Terra Roller Rockers
-30Lb injectors
-MTI Ported throttle body
- Carbon Fiber lid
-ASP pulley
-10.4 mm plug wires
-SLP high flow radiator
-160 degree thermostat
-Mallbro 255 inline fuel pump
-JAAM Ram Air kit
-SLP long tube headers ceramic coated
-3" ORY
-Mufflex 4” exhaust
-DMH Low Profile Dual electric exhaust cutouts
Suspension/Chassis:
-18” Budnik rims
-15" Summitt Star rims for the track
-Q.A.1 springs
-Q.A.1-12 way adjustable shocks Rear
-Q.A.1 -12 way adjustable Shocks revalved as an "R" series on the front
-SLP subframe connectors
-Adjustable panhard rod
-Upper panhard rod
-BMR lower control arm relocation brackets
-BMR Chrome moly tubular adjustable lower control arms
-Spohn Tunnel mount adjustable torque arm w/safety loop
-Spohn anti roll pro series rear sway bar
Drivetrain:
-TCI built transmission
-B&M large tranny pan
-Vigilante 3200 RPM stall converter
-Carbon fiber driveshaft
-3:73 gears with rearend girdle
Electronics:
-Alpine cd player
-MB quart comp mids and highs
-Eclipse pro sub woofer
-Xtant amp
-MB Quart crossovers
-Python Alarm
