New build 302

[fastford]

Brand new build.
302 Roller block hot tanked, .030" overbore, new cam bearings and freeze plugs
Truck rods with ribbed caps and ARP bolts
Speed Pro .030" over forged flat top pistons
Federal Mogul rings and bearings
Stock balancer
Flywheel w/low mile clutch & pressure plate
Balanced rotating assembly
GT40P heads with 1.84"/1.54" stainless valves, Comp Cams hyd roller spring kit, comp valve job, pedestal mount valvetrain
Comp Cams XE266-HR hydraulic roller cam 216/224 @ .050", .544"/.555" lift, 112 LS
Trick Flow 1 piece pushrods
Felpro gaskets
Melling oil pump
Speed Pro double roller timing set
Fox oil pan and pick-up tube
Front cover w/mechanical fuel pump provision
Reverse rotation water pump
Motorsport valve covers
Weiand medium riser dual plane intake

Has about 1 hour of break-in and run time on it. Painted Ford Blue, ready to drop in and go. All you need is a distributor, carb, FEAD and headers. If necessary I can set it up and run it again for a buyer.
$2500

 

[redwing89]

by any chance will you take 1700 without the intake

 

[redwing89]

im trying to find a good engine i cant find shit and the most i can spend is 1700. if theres other things you can take off to make up in price even.... i really need a good engine before i leave for college.

 

[Tberg725]

Should be listed as a 306ci with a 030 bore

 

[fastford]

im trying to find a good engine i cant find shit and the most i can spend is 1700. if theres other things you can take off to make up in price even.... i really need a good engine before i leave for college.

I PM'd you my info, we may be able to work something out if you have a core engine.

It is a .030" over 302 so it is 306 cubic inches.

 

[fastford]

Still available. I've had interest in splitting it up and if I can sell it off in pieces I might. Nice engine, ready to drop in and go.