Need leaf spring mounts welded on new axle

[wikdsvt]

Where should I take it? It needs to be lined up perfectly so I don't dog track and have the correct pinion angle (might be able to adjust with pinion shims)

 

[Pwraddr]

I think Todd would do this.

When I did mine I loosely bolted it all up and hung plumb bombs to be sure it was correct position and then measured the pinion angle. Once ok I tacked both pieces on the tube and removed the rear to have it welded properly, lol

 

[Billydroveit]

Todd. Reiters...sponsor and good guy.