Need Help on SN/95 to fox upper and lower manifold

[5.0_Pony]

I just bought an edelbrock performer upper and lower intake manifold with a bbk 70mm throttle body and egr spacer.. Now this was on a fox body which was an 89.. What actually has to be done for this to work correctly?? Wasnt sure about the throttle cable from my sn95 hook up.. I know the manifold will work because its a 5.0.. Just wasnt sure about the throttle cable and everything else..

 

[88ls1blazer]

there is an adapter elbow that you need. You also will need a 94-95 TB, you cannot use the EGR spacer, or the TB from the 86-93

 

[5.0_Pony]

there is an adapter elbow that you need. You also will need a 94-95 TB, you cannot use the EGR spacer, or the TB from the 86-93

Whats the difference between the sn95 throttle body and the fox tb? I know without using the elbow i'd just have to get a fox CAI..