Need Headers For Trick Flow R heads

Steve O.

Steve O.

Forum Member
Looking for a set of headers that will bolt up to the trick flow R cylinder head. Do not need anything real nice. Prefer long tube type that will fit a 1990 fox body. Need them for mock up only.

Thanks,

Steve
 
I have an old set kickin' around. 2" primary, 3 1/2" collector for a 9.5 deck motor. I believe they are old Pro-Mustang pieces, TIG welded, used to be nice at one time, still not too bad. $150
 
JoeP,

What type of trans will they clear. Do you know if they will clear a PG with an JW Ultra bell case? How far is Tecumseh from Shelby Twp?

Thanks for your time,
Steve
 
Steve- I have never installed this set, they were spares in case I smashed the ones on my old car. I don't think they will clear a 'glide, just C4/T5 trans, but I've never tried either. Unfortunately you are far away or I'd lend them to you to try. I'm about 35 minutes S.W. of Milan dragway.
 
John,

The exhaust bolt pattern is dual. The heads have both diagnal and horizontal mounting holes. What do you have?

Steve
 
Steve O. said:
John,

The exhaust bolt pattern is dual. The heads have both diagnal and horizontal mounting holes. What do you have?

Steve
Click to expand...

i have a set of headers, full length with exhaust. they are 1 7/8 with 3in hpipe and flowmasters. $350 located in roseville

they have staggered bolt pattern

can call me 586-350-5134
 
John,

They sound nice but more than what I am willing to spend for a set of mock up headers. Car is going to be a turbo street car. Just want to make sure my mid plate will clear if we ever decide to go to a NOS type motor. Have the time now to make changes if needed. Thanks for your time.

Steve
 
You must log in or register to reply here.
Back
Top