Need 302 stuff asap

Pure84GTT

Pure84GTT

Club Member
hey guys i need to get my car running again asap

302 is down to shortblock.... im gunna need gaskets, water pump, and i'd like to get a solid roller cam (84 block) so i dont need to pull it down that far when i do my heads in the spring


my parents want my mustang out of the garage asap i have till monday or its getting towed to the junkyard, to them its just a 26 year old car thats torn apart

any help is greatly appreciated


alex
 
I have stock valvecovers off of an 89 302.... Let me know if you need em
 
thanks for the help guys

i still have the powered by ford ones from 84, i appreciate the lookin out tho bro !

alex
 
I have some gaskets.

Felpro Oil Pan Gasket 1 piece rubber - $10 ($20 new)
Felpro Valve Cover Gasket rubber - $18 ($27 new)

or $25 for both.
 
I have a cam motion solid roller and Victor Jr intake for ya. Here's the cam specs:

Intake
Lift = .656"
Duration @ .050" = 254
Intake Center line = 104
Hot Lash = .023


Exhaust
Lift = .664"
Duration @ .050" = 258
Lobe separation = 108
Hot lash = .025


Lift is based on a 1.6 RR

Firing Order: 13726548

designed to shift around 6800-7000 RPM, it is a "street" roller, meaning not extemely aggressive lobe profiles to keep from killing springs, etc. Idles good.

I had it in my car with 10.4:1 compression and it went a best of 10.90 @ 124 @ 3000 lbs

The intake is new, never bolted on an engine.

Make an offer if you are interested.
 
i have a 1993 block with a b303 camshaft and a set of diamond pistons, rings,pins make offer if needed
 
You must log in or register to reply here.
Back
Top