N/A 7.3 to Powerstroke

a383z28

a383z28

Forum Member
Hey guys I am putting a powerstroke in one of our roll off trucks that had a 7.3 N/A motor in it. The trans was a spicer 5 speed. A guy put a 6.9 ford motor in it and didn't get the motor wired right and didn't run the best. I spent a week re working this and geting all the wires mated to the International body. The truck is a 91 International 4600. I have been taking pictures as I go just to keep. I have a lot of computer electrical work as soon as the fab work is done. Thanks for looking. Let me know what you think and/or what you think. I always need ideas.
 
51480f37cda1211.jpg


51480f37cdc4822.jpg


51480f37cd68fb5.jpg


51480f37ce166fb.jpg


51480f37cde6333.jpg


51480f37f2a0292.jpg


51480f37f2c1da2.jpg


51480f37f2e252b.jpg


51480f37f30ee5b.jpg


51480f37f32fdb2.jpg
 
Thank you! I like to do this kinda of work when I have the chance. I really like to fab stuff like this and make it look good and work. I ended up making an entire K member with top brackets that go over the frame rail and bolt. I just painted it today. I took a bunch of pictures of the progress. I was suprised when I bolted the motor down on the mounts, how heavy a powerstroke engine and trans weighed. So I put it on a grain scale and it pegged the 1800lb mark. So I had to make more braces and it came out great! I shocked myself when I looked at it all done. Can you post up the last pictures for me? Thank you for helping me out with the pictures and thanks for the comments!
 
You must log in or register to reply here.
Back
Top