My 84 Brougham

kevink22 said:
That was me. Allen Park was right on my bumper. I thought about pulling over before they turned turned their lights on. You must not be looking very hard Queef.

By the way, I whooped roscoes 454 with my 5.3 on Tele today. He said he was out of gas.
Click to expand...

Either that or the carpet was caught up under the pedal....;)
 
kevink22 said:
Keith Lacroix. I wanted to do it myself but there were too many things with the kit I didn't like. I used to tig and had a borrowed welder but no bender or notcher. Plus I have no time and he did a better job than I could have.
Click to expand...

I see. It looks very well done. Nice clean welds.
 
kevink22 said:
That was me. Allen Park was right on my bumper. I thought about pulling over before they turned turned their lights on. You must not be looking very hard Queef.

By the way, I whooped roscoes 454 with my 5.3 on Tele today. He said he was out of gas.
Click to expand...
who got on ecorse first roscoe that = a w for roscoe
 
Hey you taking that slow turd to the track saturday K-Fed?

You know it is going to run slower with all that unessential fence post weight you added,:893goof_v
 
mcougar351w said:
Hey you taking that slow turd to the track saturday K-Fed?

You know it is going to run slower with all that unessential fence post weight you added,:893goof_v
Click to expand...
hey kev i heard all day and the only tin can that thought he could got spanked nice way to start the year wont be able to get a race till next year when they all get new motors
 
i will be out by the end of the month,and apparently you havnt looked at the cutty lately,he has joined the tin can club,he even got to race the colmannator,haha
 
Easy, I'll be riding in luxury again shortly. But what better time to go to the track. My daughter wants to go for a ride so seats and carpet may be installed today.

The slug went a couple 10.98s and a bunch of 11.0s. 60 ft has improved to 1.52-1.55 lauching from 2000 rpm.
 
kevink22 said:
Easy, I'll be riding in luxury again shortly. But what better time to go to the track. My daughter wants to go for a ride so seats and carpet may be installed today.

The slug went a couple 10.98s and a bunch of 11.0s. 60 ft has improved to 1.52-1.55 lauching from 2000 rpm.
Click to expand...


yeah that tin car race car ran good yesterday, if you need a spare tire let me know :roll:
 
kevink22 said:
Easy, I'll be riding in luxury again shortly. But what better time to go to the track. My daughter wants to go for a ride so seats and carpet may be installed today.

The slug went a couple 10.98s and a bunch of 11.0s. 60 ft has improved to 1.52-1.55 lauching from 2000 rpm.
Click to expand...

Nice!:blush:
 
jroscoe said:
hey kev i heard all day and the only tin can that thought he could got spanked nice way to start the year wont be able to get a race till next year when they all get new motors
Click to expand...
U weren't even out there Roscoe, you scared to come out and talk shit in real life? get that raggety chevy leadsled out and show the tin cans up, if you can,:ls1:
 
You must log in or register to reply here.
Back
Top