Mustang Vacuum ?'s

SuperStang90

SuperStang90

Club Member
There are a few vacuum soleinoids on the back of the passenger side strut tower. I want to know if I can remove them, or what ones I can remove. I'm not running EGR, no smog pump, No A/C. I am however still running heat, so I want all my vents to work and whatnot.

The vacuum lines run into that little ball reservoir in the fenderwell. Im assuming thats a storage tank for the vacuum. Any suggestions? Im trying to clean the engine bay up and hide all the wire and vacuum lines that I can .

Heres a couple pics

P1010089.jpg


P1010090.jpg


P1010091.jpg


P1010092.jpg
 
So I should be able to just remove those lines then? Im pretty sure the lines that go to the HVAC controls are these ones connected to the check valve on the upper left of the firewall here

P1010093.jpg
 
Sean said:
That is EGR and EVAP emissions stuff.
Click to expand...

x2

just make sure the vacuum line going through the firewall is hooked up, a vac. reservoir and check valve wouldn't hurt, but not manditory, vents might go to defrost under hard accel, but otherwise, no issues
 
Im pretty sure that is a check valve on the firewall going to that line that is coming through the firewall. I'll just have to relocate that down further. Thanks guys
 
You must log in or register to reply here.
Back
Top