Mustang Vacuum ?'s

[SuperStang90]

There are a few vacuum soleinoids on the back of the passenger side strut tower. I want to know if I can remove them, or what ones I can remove. I'm not running EGR, no smog pump, No A/C. I am however still running heat, so I want all my vents to work and whatnot.

The vacuum lines run into that little ball reservoir in the fenderwell. Im assuming thats a storage tank for the vacuum. Any suggestions? Im trying to clean the engine bay up and hide all the wire and vacuum lines that I can .

Heres a couple pics

 

[Sean]

That is EGR and EVAP emissions stuff.

 

[SuperStang90]

So I should be able to just remove those lines then? Im pretty sure the lines that go to the HVAC controls are these ones connected to the check valve on the upper left of the firewall here

 

[dave89iroc]

That is EGR and EVAP emissions stuff.

x2

just make sure the vacuum line going through the firewall is hooked up, a vac. reservoir and check valve wouldn't hurt, but not manditory, vents might go to defrost under hard accel, but otherwise, no issues

 

[SuperStang90]

Im pretty sure that is a check valve on the firewall going to that line that is coming through the firewall. I'll just have to relocate that down further. Thanks guys