Mustang project help

83z28

New member
I have not been on here in a while since I sold my z28, but I bought a new car and just started working on it so I thought I would put it up here and see if any one had any input.

First off let me tell you a little bit about the car
1995 Mustang GT 5 speed
All stock doesnt even have Flowmasters!! Which I thought were stock on those lol. It has 75k miles on it and it was an original owner car.

Ok now for what I want.
I really only want to get into the 12s My camaro ran 12.80 and that was good enough for me cause I will be driving this around alot. As of right now its kinda slow I think my wifes stratus will give it a run for its money lol.

so far I have been buying parts here and there and here is my list I will be getting more and I am waiting till I get the rest of what is needed to start wrenching on it

Used GT40 intake
Used GT40 heads
1.7 roller rockers summit brand
guides
new pushrods
70mm t-body
T-body spacer used not sure If im going to use it what you think?
summit fender cold air intake
trick flow under drive pulleys
summit 255 fuel pump
35-75 fuel regulater
pace setter long headers
pace setter x-pipe
summit dual cut outs (electrc)


Things I still need are
Cam
lifters
timing chain
X-pipe back exhaust not sure if im just going to put some flows on it and dump it or somting else andy sugestions?
???? do I need bigger injectors?????
and I am thinking about gettin the zex nitrous wet 125 shot and boost fuel pump Will I need this to get into 12s?????
and also a tune or chip I cant find anyting to tune this I have found custom chips so IDK

I know I will also need some gears but I have never put gears in and I dont feel like atempting it so that will come right before summer after every thing else

I also have not picked up any suspension parts yet but I seen summit has a set of upper an dlower control arms for the rear fro 100 right now so I might but those in my next order

any help would be great thanks I will put up some pics soon as I get home from work


Mike
 
Yeah I had a awsome 9k tax return so its worked out im favor for the car I have a firend witha fox body 5.0 with full bolt ons and a fresh rebuild and he says cobra heads and intake and i a I thine e303 cam I just want to make sre I can beat him and a couple of other lightly modded cars high 12s will do it I just hope those mods will make my car get there
 
Put on all parts you have and add 24 pounders with an upgraded maf. 373 or 410 gears and it will run in the 12s no problem.

I went 12.1x at 3050 with a similiar combo with stock cam and shifted at 5300.
 
Yeah I had a awsome 9k tax return so its worked out im favor for the car I have a firend witha fox body 5.0 with full bolt ons and a fresh rebuild and he says cobra heads and intake and i a I thine e303 cam I just want to make sre I can beat him and a couple of other lightly modded cars high 12s will do it I just hope those mods will make my car get there

Take that 9g's and head on over to yellowbullet.com and get yourself a 9 or 10 second ride for that money!!!
 
Take that 9g's and head on over to yellowbullet.com and get yourself a 9 or 10 second ride for that money!!!

I already have this one and it has low miles, and I have already been buying tons of shit for this. I dont see any cars for sale on that site where do they list them at I looked in the forum
 
Last edited:
Put on all parts you have and add 24 pounders with an upgraded maf. 373 or 410 gears and it will run in the 12s no problem.

I went 12.1x at 3050 with a similiar combo with stock cam and shifted at 5300.

so you dont think I would need the spray?
 
I have not been on here in a while since I sold my z28, but I bought a new car and just started working on it so I thought I would put it up here and see if any one had any input.

First off let me tell you a little bit about the car
1995 Mustang GT 5 speed
All stock doesnt even have Flowmasters!! Which I thought were stock on those lol. It has 75k miles on it and it was an original owner car.

Ok now for what I want.
I really only want to get into the 12s My camaro ran 12.80 and that was good enough for me cause I will be driving this around alot. As of right now its kinda slow I think my wifes stratus will give it a run for its money lol.

so far I have been buying parts here and there and here is my list I will be getting more and I am waiting till I get the rest of what is needed to start wrenching on it

Used GT40 intake
Used GT40 heads
1.7 roller rockers summit brand
guides
new pushrods
70mm t-body
T-body spacer used not sure If im going to use it what you think?
summit fender cold air intake
trick flow under drive pulleys
summit 255 fuel pump
35-75 fuel regulater
pace setter long headers
pace setter x-pipe
summit dual cut outs (electrc)


Things I still need are
Cam
lifters
timing chain
X-pipe back exhaust not sure if im just going to put some flows on it and dump it or somting else andy sugestions?
???? do I need bigger injectors?????
and I am thinking about gettin the zex nitrous wet 125 shot and boost fuel pump Will I need this to get into 12s?????
and also a tune or chip I cant find anyting to tune this I have found custom chips so IDK

I know I will also need some gears but I have never put gears in and I dont feel like atempting it so that will come right before summer after every thing else

I also have not picked up any suspension parts yet but I seen summit has a set of upper an dlower control arms for the rear fro 100 right now so I might but those in my next order

any help would be great thanks I will put up some pics soon as I get home from work


Mike

first thing talk to greentrunk he has some ported tfs twisted wedge 4sale
i have a tfs stage 2 cam
put a teamz k-member and a-arms with coil overs
teamz rear suspension
410 gear
frame connectors
relocate battery to trunk
a short throw shifter/after market quadrent and cable
start ther and 12s will be easy.
 
I already have this one and it has low miles, and I have already been buying tons of shit for this. I dont see any cars for sale on that site where do they list them at I looked in the forum

1) Forum
2) Parts for sale
3) cars/rollers

plenty of nice shit over there for cheap.
 
83z28...From Marysville huh??? Ever go to Mobil at the end of 69 in Port Huron?

I have been there a few times but I have lived in FL for about 6 years I moved back about 2 years ago but yeah back in the day I was part of Grounded CC and I used to hang out with Steve B BLKHWK but we dont talk any more
 
first thing talk to greentrunk he has some ported tfs twisted wedge 4sale
i have a tfs stage 2 cam
put a teamz k-member and a-arms with coil overs
teamz rear suspension
410 gear
frame connectors
relocate battery to trunk
a short throw shifter/after market quadrent and cable
start ther and 12s will be easy.

man joe he doesnt need rear suspenion to run 12s. shit my stock and it does 1.4 sixtys no problem.:hugegrin:

heads from greentrunk and that cam would be a good idea.
 
http://cleveland.craigslist.org/cto/1570175536.html I found this on CL and am thinking about buying this and throwing the heads and intake I just bought on this with a cam and some spray and keep my very clean stang stock for now but it is a 5 speed with 4:10s will this have pretty bad drivabilty because of ths I wont be doing much or any high way driviing but I want to be able to drive it to cruise and shit and I also heard with 5 speed and 410s first gear is useless any info on this ?
 
Back
Top