Mustang dzus fastener pics needed

NVR2FST

NVR2FST

Forum Member
Does anyone have any pics of how they mounted the dzus fasteners at the leading edge of the hood - between the headlights?

Thanks in advance
 
There was a thread on this over on YB with a few pictures, here's a few I found...


enginefront.jpg


P9030002.jpg
 
Last edited:
Mclovin said:
call me dumb but why not just use hood pins ?
Click to expand...

Many of the ultra lightweight, single layer race hoods have no inner structure and are rather flimsy. They require some type of anchor along the front to keep them from lifting at speed when air is pushed underneath them.
 
Thanks for the pics guys - I really like the Racecraft set-up, I'll have to look it up.

As stated, the really light hoods will lift in the front even with 6 fasteners down the sides. Mine starts to show daylight around 50 plus mph on the street, so I need something.
 
JoeP. said:
Many of the ultra lightweight, single layer race hoods have no inner structure and are rather flimsy. They require some type of anchor along the front to keep them from lifting at speed when air is pushed underneath them.
Click to expand...

gotcha ! i agree though i like the look better than hood pins but we've used these on sprint car panels for years and the hood pins on my truggy are way easier and quicker :w00t:
 
You must log in or register to reply here.
Back
Top