modified pistols semi or revolver, what do you have, and what have you done.

You can get a trigger mounted light I believe on the 26.

No point in getting the small gun if you're going to stick shit on it I guess. I have a 26 but even with the pinky extension I prefer my 19.

I'd probably take a rifle or shotgun over a pistol for HD anyway. And as far as getting shot by your wife when you're coming home late at night, that's when a simple 'Honey I'm home...' might be smart.
 
No point in getting the small gun if you're going to stick shit on it I guess. I have a 26 but even with the pinky extension I prefer my 19.

I'd probably take a rifle or shotgun over a pistol for HD anyway. And as far as getting shot by your wife when you're coming home late at night, that's when a simple 'Honey I'm home...' might be smart.

I don't see why not? If it's your carry gun, you want it to be comfortable without sacrificing reliability. The items I mentioned (extensions, grips) don't impact reliability and further comfort. Again, it's all personal preference.

As for as a choice of firearm for HD, that's entirely up to the individual. No matter what they choose, I feel an attachable light is something that's just good to have for HD.

And how many people yell "honey I'm home" in the middle of the night when they're supposed to be sleeping? I'm going to assume most try to keep quiet so they don't wake the people sleeping in the house. Again, the light just makes it easier for someone to identify their target and not make a mistake you'll regret for the rest of your life.
 
Last edited:
I don't see why not? If it's your carry gun, you want it to be comfortable without sacrificing reliability. The items I mentioned (extensions, grips) don't impact reliability and further comfort. Again, it's all personal preference.

I was thinking more along the lines of internals like the slide release extension.

And how many people yell "honey I'm home" in the middle of the night when they're supposed to be sleeping?

Only makes sense if you know someone in the house is going to come out guns a blazin'
 
I was thinking more along the lines of internals like the slide release extension.

Only makes sense if you know someone in the house is going to come out guns a blazin'

How would the slide release extension degrade reliability?

Pretty sure the husband didn't expect his wife to come out guns blazing. Either way, doesn't refute the fact that having a light on your HD firearm is a smart option.
 
How would the slide release extension degrade reliability?
I don't like the idea of a non-factory installed part inside the gun (except for springs) that could (in theory) bend or break and cause the gun to not function. If it's a part from Glock I would probably be okay with it but not from Jimbob's internet gunsmith shop. Either way there's no real reason to have to touch the slide release when you're actually using the gun. The gun should be loaded and ready to fire 24/7 and when you run out of ammo, the slide will lock open anyway.
Either way, doesn't refute the fact that having a light on your HD firearm is a smart option.

Not saying a light isn't smart, but buying a dinky gun and putting a light on it is dumb.
 
I don't like the idea of a non-factory installed part inside the gun (except for springs) that could (in theory) bend or break and cause the gun to not function. If it's a part from Glock I would probably be okay with it but not from Jimbob's internet gunsmith shop. Either way there's no real reason to have to touch the slide release when you're actually using the gun. The gun should be loaded and ready to fire 24/7 and when you run out of ammo, the slide will lock open anyway.

Not saying a light isn't smart, but buying a dinky gun and putting a light on it is dumb.

The extended release is nothing more but the same exact part but with a bigger edge on the outside.

The release is obviously for range time. Not actual protection. Again, comfort of shooting without sacrificing reliability.

I don't know why a "dinky gun" (Glock 26 I'm assuming?) is considered a bad HD weapon. If it's good enough to protect you outside the home, then it's good enough to protect you inside the home.
 
The extended release is nothing more but the same exact part but with a bigger edge on the outside.

The release is obviously for range time. Not actual protection. Again, comfort of shooting without sacrificing reliability.

I don't know why a "dinky gun" (Glock 26 I'm assuming?) is considered a bad HD weapon. If it's good enough to protect you outside the home, then it's good enough to protect you inside the home.

It makes compromises so that it's smaller/easier to carry. Stubby pistols are hard to hang on to, it's easier to take a pistol from someone than a rifle, etc
 
It makes compromises so that it's smaller/easier to carry. Stubby pistols are hard to hang on to, it's easier to take a pistol from someone than a rifle, etc

Very true, and you could beat someone with more space between you with a shot gun or rifle if all else fails... lol
 
There is a company that does a conversion that will shorted the grip of a g19 to use g26 so you can have the longer barrel and the rail. this way you have the short grip for carry and the light rail.

http://www.bowietacticalconcepts.com/pictures.html
http://www.bowietacticalconcepts.com/sitebuilder/images/glock_19_to_26-400x330.jpg

So by doing that you ruin a 19 so you can carry less ammo and still have the short-ass grip? If you even it up and get the pinky extensions the size difference is even smaller.

Glock+17-19-26.jpg


Just buy two guns. You're already going to be $160 in - buying some Glock 26 mags ($20 each), a pair of pinky base plates ($10 each), $100 on getting the grip shortened...
 
Back on topic, if you want a handgun to modify for the sake of modifying, get yourself a 1911. You can get a RIA for $399, they are the Ford Mustang of handguns. Any modification you can think of, you can mail order.
 
Back on topic, if you want a handgun to modify for the sake of modifying, get yourself a 1911. You can get a RIA for $399, they are the Ford Mustang of handguns. Any modification you can think of, you can mail order.

My next purchase will by a g26 after that my thought was a 1911 for the reason that you have point out, to be on topic I asked other to share their pics and list of mods. The shorting of the grip on the G19 solved and is and option that solves issue that dave89iroc had been discussing maybe not everyone knows about so I shared it. I like the short grip conversion but as you pointed with cost I would be spending its a safer bet to buy the g26 it was the main reason for me buying one.

Has any tried any coatings like Cerakote?
 
Holy cow - is this GlockTalk or what? :later:

1) A glock is tool, not piece of art. It's a reliable & inexpensive gun. IMO, any upgrades/mods other than maybe some Hogue handgrips or sights is a complete waste. If you want more performance than that, you really should be looking at a different gun - not mods.

2) I would be very careful about mod'ing a gun you're going to carry for defense. God forbid you actually have to use it someday, you could be giving the prosecutor more ammo against you. OH judge, he was looking for trouble! He had a "hair trigger" installed, threaded barrel, etc.

3) Law enforcement guns are not DAO & heavier triggers so that they "don't shoot the donuts out of people's hands". They do that so that it requires a very deliberate pull of the trigger by the officer before using deadly force. The last thing police depts want is a bunch of cops running around town with light triggers accidentally shooting people when the adrenaline starts kicking in.
 
Back
Top