efisixpack
Forum Member
I have for sale a Miller Coolmate 3 Tig Welder cooler (this is not the a welder but a cooler for them). It comes with the tig lines and handle anlong with a regulator. Works great and as you can see is in very nice condition. These go for over $750 new without the tig lines and handle.
Heres some info on it I found on the internet:
The compact, horizontal Coolmate 3 allows stacking or convenient mounting onto a trailer or other equipment. It is designed for water-cooled torches rated up to 500 amps, and utilizes an efficent fin-and-tube heat exchanger. Unlike most comprtitive systems, this unit is equipped with a power switch so you can turn the unit on and off at the front panel. The polyethylene-molded coolant tank, fan shroud, filler spout and lifting handles are rustproof. A "paddle wheel" indicator makes it easy to confirm that coolant is flowing. Filter and coolant filling spout are conveniently located for easy access st the front panel.
Closed-loop design with radiator reduces coolant temperatures and prevents the system from overheating. It also recirculates the coolant through a fan-cooled heat exchanger.
Rustproof coolant reservoir molded of polyethylene for durability and corrosion resistance.
Positive vane-style displacement pumps provide consistent coolant flow and pressure rating with long pump-life expectancy.
Factory-preset pressure-relief valves (55 PSI) maintain consistent pressure during operation.
Paddle wheel flow indicator visually confirms that there is coolant flowing through the system.
Standard inlet/outlet torch fittings are compatible with TIG and MIG torches having standard 5/8-18 left-hand fittings.
10 ft (3 m) power cords with plugs are longer than most power cords in the industry providing the extra length when required.
Thermally protected 1/4 HP motor guards against motor damage due to overheating.
Want $375.00 Pick up only. PM with questions.
Heres some info on it I found on the internet:
The compact, horizontal Coolmate 3 allows stacking or convenient mounting onto a trailer or other equipment. It is designed for water-cooled torches rated up to 500 amps, and utilizes an efficent fin-and-tube heat exchanger. Unlike most comprtitive systems, this unit is equipped with a power switch so you can turn the unit on and off at the front panel. The polyethylene-molded coolant tank, fan shroud, filler spout and lifting handles are rustproof. A "paddle wheel" indicator makes it easy to confirm that coolant is flowing. Filter and coolant filling spout are conveniently located for easy access st the front panel.
Closed-loop design with radiator reduces coolant temperatures and prevents the system from overheating. It also recirculates the coolant through a fan-cooled heat exchanger.
Rustproof coolant reservoir molded of polyethylene for durability and corrosion resistance.
Positive vane-style displacement pumps provide consistent coolant flow and pressure rating with long pump-life expectancy.
Factory-preset pressure-relief valves (55 PSI) maintain consistent pressure during operation.
Paddle wheel flow indicator visually confirms that there is coolant flowing through the system.
Standard inlet/outlet torch fittings are compatible with TIG and MIG torches having standard 5/8-18 left-hand fittings.
10 ft (3 m) power cords with plugs are longer than most power cords in the industry providing the extra length when required.
Thermally protected 1/4 HP motor guards against motor damage due to overheating.
Want $375.00 Pick up only. PM with questions.
