Foolsgold80z
Club Member
Hello MM.
After 12 years in business, I am in the process of selling out my CNC machining operation.
I have all kinds of shop and inspection equipment available.
Everything is going to be sold for 50 cents on the dollar.
Meridian Tool Co.
2850 Alliance Dr. Suite L
Waterford, Mi 48328
248-605-5093
Mark
Tools:
Import 1.4-2.4" bore gage $10. ( plastic handle is cracked, works fine )
Import 2-6" bore gages $20. ( holding for 388Monte )
Mitutoyo .7-1.4" bore gage $150. ( J+L list $337.59 )
4" Toolmaker's vise $35.
3" Toolmaker's sine vise $50.
12" Import dial caliper $25.
6" Import dial caliper $10.
New carbide endmills of various sizes for 1/2 of list.
Taps. A complete drawer index of taps up to 5/8" including pipe taps and some metrics $150. This is MANY 100's of dollars worth of taps.
These are just some examples, there is way too much to list here.
Machinery:
!!!SOLD!!!
Wilton Model 7040 10-16" horizontal band saw.
This is a VERY nice saw. Less than 2 years old and like new.
2 h.p. 3 phase motor.
8 gallon coolant system.
Variable blade speed adjustment, no belts and pulleys to deal with.
Uses 1" x 135" blades.
This saw can cut 10" x 10" sq., 9" x 16" rect., or 10" round material.
J+L lists for $4,879.70.
Weight 930 lbs.
$2500 or best offer.
!!!SOLD!!!
!!!EBAY SOLD!!!
1995 Supermax Max 5 CNC machining center
30 tool chain
50 taper spindle
Arm style tool changer
40" x 20" x 20" travels
Fanuc OM control and redcap Fanuc servo motors.
This is a large piece of equipment and very heavy ( 19,500 lbs ).
It has a 2" steel subplate on the table.
I have a rack with 70 various tool holder and a Huot roll around cart with
a Bison tool holder block for changing cutters included with the machine.
!!!EBAY SOLD!!!
!!!SOLD!!!
1989 Daewoo Puma 6s Turning center ( CNC lathe )
6" Kitigawa chuck
Fanuc OT control
Jorgensen chip conveyor
This is a very clean, quiet, and accurate lathe.
$10,000 or best offer.
I am currently doing a repair on the control on this lathe.
It will be completely repaired and demonstrated before any sale.
!!!SOLD!!!
This is a partial list of stuff I have for sale.
Anybody who wants to look around can p.m. me and set up an appointment
to come by and check things out.
The shop is in Waterford.
Meridian Tool Co.
2850 alliance Dr. Suite L
Waterford, Mi 48328
248-605-5093
Mark
After 12 years in business, I am in the process of selling out my CNC machining operation.
I have all kinds of shop and inspection equipment available.
Everything is going to be sold for 50 cents on the dollar.
Meridian Tool Co.
2850 Alliance Dr. Suite L
Waterford, Mi 48328
248-605-5093
Mark
Tools:
Import 1.4-2.4" bore gage $10. ( plastic handle is cracked, works fine )
Import 2-6" bore gages $20. ( holding for 388Monte )
Mitutoyo .7-1.4" bore gage $150. ( J+L list $337.59 )
4" Toolmaker's vise $35.
3" Toolmaker's sine vise $50.
12" Import dial caliper $25.
6" Import dial caliper $10.
New carbide endmills of various sizes for 1/2 of list.
Taps. A complete drawer index of taps up to 5/8" including pipe taps and some metrics $150. This is MANY 100's of dollars worth of taps.
These are just some examples, there is way too much to list here.
Machinery:
!!!SOLD!!!
Wilton Model 7040 10-16" horizontal band saw.
This is a VERY nice saw. Less than 2 years old and like new.
2 h.p. 3 phase motor.
8 gallon coolant system.
Variable blade speed adjustment, no belts and pulleys to deal with.
Uses 1" x 135" blades.
This saw can cut 10" x 10" sq., 9" x 16" rect., or 10" round material.
J+L lists for $4,879.70.
Weight 930 lbs.
$2500 or best offer.
!!!SOLD!!!
!!!EBAY SOLD!!!
1995 Supermax Max 5 CNC machining center
30 tool chain
50 taper spindle
Arm style tool changer
40" x 20" x 20" travels
Fanuc OM control and redcap Fanuc servo motors.
This is a large piece of equipment and very heavy ( 19,500 lbs ).
It has a 2" steel subplate on the table.
I have a rack with 70 various tool holder and a Huot roll around cart with
a Bison tool holder block for changing cutters included with the machine.
!!!EBAY SOLD!!!
!!!SOLD!!!
1989 Daewoo Puma 6s Turning center ( CNC lathe )
6" Kitigawa chuck
Fanuc OT control
Jorgensen chip conveyor
This is a very clean, quiet, and accurate lathe.
$10,000 or best offer.
I am currently doing a repair on the control on this lathe.
It will be completely repaired and demonstrated before any sale.
!!!SOLD!!!
This is a partial list of stuff I have for sale.
Anybody who wants to look around can p.m. me and set up an appointment
to come by and check things out.
The shop is in Waterford.
Meridian Tool Co.
2850 alliance Dr. Suite L
Waterford, Mi 48328
248-605-5093
Mark
Last edited:
