cobrarwanab
Club Member
anyone have a used autometer lunar gauge cluster for sale? the one that is a direct replacement for spedo.tack,oil,fuel,etc.
looking for used autometer luner spedo cluster
- Thread starter cobrarwanab
- Start date
ghostchevy
Forum Member
Brand new in the box aeroforce scan gauge. Truly a must have for any high performance vehicle.
Fits 96 and newer vehicles- Gauge is black face with brushed bezel and blue back light.
any other info required pm me. Great gauge looking to get $220
Cell- 225-0414 Interested give call and come pic it up.
Tech info:
The Interceptor is capable of displaying the following parameters, two at a time, at a
rate of approximately 20 times per second. Not all are supported by every vehicle, so
there is no guarantee that the Interceptor will display all of these on your particular car
or truck. If the vehicle is broadcasting the parameter, the Interceptor will recognize this
and make it available for display. RPM
MPH
Intake Air Temperature
Mass Air Flow Sensor Frequency
Mass Air Flow Sensor (lb/min.)
Engine Coolant Temperature
Injector Pulse Width (bank 1 and 2 if supported)
Long Term Fuel Trim (bank 1 and 2 if supported)
Short Term Fuel Trim (bank 1 and 2 if supported)
O2 Sensor Voltage (bank 1 and 2 if supported)
Manifold Pressure in PSI (Boost pressure for factory
turbo/supercharger applications)
Ignition Advance
Knock Retard
Engine Run Time
Battery Voltage
Transmission Temperature
Idle air Control Counts
Throttle Position Percentage
Throttle Position Voltage
Engine Load
Oil pressure (some 8 cylinder engines)
Fuel economy (vehicle must have a MAF
Horsepower sensor for these 2 items)
Two user configurable analog inputs
The Interceptor gauge is 52mm (2 1/16") in diameter and will fit in all standard gauge
pods of this size. A 5' cable is included with appropriate OBD2 connector. A splitter cable
is included with the dual Interceptor units.
A function menu is available by pushing both buttons simultaneously. The first option
allows you to enter a record mode. Once selected, the Interceptor will return to normal
scan mode, but will start recording the displayed data automatically when the throttle
exceeds 60%. Approximately 45-60 seconds of data will be stored. Returning to the menu
screen, you can choose to replay the stored data on the Interceptor display.
Another menu option offers the ability to swap the foreground and backround colors of the
display (to be shown soon in the IMAGES section of this site). Using this feature, for
example, the gauge with a black backround and blue characters (negative image)
becomes a blue backround with black characters (positive image). Not only can this be
visually appealing but beneficial in changing lighting conditions. Positive images are
easier to read in bright sunlight, negative at night.
The Interceptor's scan rate can also be adjusted through a menu function.
DTC's (Diagnostic Trouble Codes) can be accessed and cleared via menu options. Click
here for a list of powertrain diagnostic code explainations.
A performance measurement mode is available as well. Once selected the gauge will
measure 0-60 mph time, 1/8 and 1/4 mile elapsed time with speed.
An integrated shift light, using high intensity LED's, can be programmed to light at any
desirable rpm point. Due to the gauges extremely fast update rate, this light is very
accurate and easy to set. Once you try it you'll find you can't live without it!
Finally the two analog inputs can be configured through menu choices. A linear conversion
can be entered so that an analog signal connected to the gauge can be read in appropriate
units. These inputs are handy for pressure signals such as those from MAP and oil
pressure sensors, analog outputs from Air/Fuel ratio kits, etc. These signal can then be
read and recorded along side the other parameters obtained on the vehicle's bus.
Installation is accomplished by simply plugging the supplied connector into the OBD2 port
below the steering wheel and connecting a separate included wire to a switched 12v
vehicle power source. Virtually plug-and-play!
Fits 96 and newer vehicles- Gauge is black face with brushed bezel and blue back light.
any other info required pm me. Great gauge looking to get $220
Cell- 225-0414 Interested give call and come pic it up.
Tech info:
The Interceptor is capable of displaying the following parameters, two at a time, at a
rate of approximately 20 times per second. Not all are supported by every vehicle, so
there is no guarantee that the Interceptor will display all of these on your particular car
or truck. If the vehicle is broadcasting the parameter, the Interceptor will recognize this
and make it available for display. RPM
MPH
Intake Air Temperature
Mass Air Flow Sensor Frequency
Mass Air Flow Sensor (lb/min.)
Engine Coolant Temperature
Injector Pulse Width (bank 1 and 2 if supported)
Long Term Fuel Trim (bank 1 and 2 if supported)
Short Term Fuel Trim (bank 1 and 2 if supported)
O2 Sensor Voltage (bank 1 and 2 if supported)
Manifold Pressure in PSI (Boost pressure for factory
turbo/supercharger applications)
Ignition Advance
Knock Retard
Engine Run Time
Battery Voltage
Transmission Temperature
Idle air Control Counts
Throttle Position Percentage
Throttle Position Voltage
Engine Load
Oil pressure (some 8 cylinder engines)
Fuel economy (vehicle must have a MAF
Horsepower sensor for these 2 items)
Two user configurable analog inputs
The Interceptor gauge is 52mm (2 1/16") in diameter and will fit in all standard gauge
pods of this size. A 5' cable is included with appropriate OBD2 connector. A splitter cable
is included with the dual Interceptor units.
A function menu is available by pushing both buttons simultaneously. The first option
allows you to enter a record mode. Once selected, the Interceptor will return to normal
scan mode, but will start recording the displayed data automatically when the throttle
exceeds 60%. Approximately 45-60 seconds of data will be stored. Returning to the menu
screen, you can choose to replay the stored data on the Interceptor display.
Another menu option offers the ability to swap the foreground and backround colors of the
display (to be shown soon in the IMAGES section of this site). Using this feature, for
example, the gauge with a black backround and blue characters (negative image)
becomes a blue backround with black characters (positive image). Not only can this be
visually appealing but beneficial in changing lighting conditions. Positive images are
easier to read in bright sunlight, negative at night.
The Interceptor's scan rate can also be adjusted through a menu function.
DTC's (Diagnostic Trouble Codes) can be accessed and cleared via menu options. Click
here for a list of powertrain diagnostic code explainations.
A performance measurement mode is available as well. Once selected the gauge will
measure 0-60 mph time, 1/8 and 1/4 mile elapsed time with speed.
An integrated shift light, using high intensity LED's, can be programmed to light at any
desirable rpm point. Due to the gauges extremely fast update rate, this light is very
accurate and easy to set. Once you try it you'll find you can't live without it!
Finally the two analog inputs can be configured through menu choices. A linear conversion
can be entered so that an analog signal connected to the gauge can be read in appropriate
units. These inputs are handy for pressure signals such as those from MAP and oil
pressure sensors, analog outputs from Air/Fuel ratio kits, etc. These signal can then be
read and recorded along side the other parameters obtained on the vehicle's bus.
Installation is accomplished by simply plugging the supplied connector into the OBD2 port
below the steering wheel and connecting a separate included wire to a switched 12v
vehicle power source. Virtually plug-and-play!