Lookin for 2 Pt106's. Anyone got anything?
- Thread starter cjmatt
- Start date
QuickLX
Club Member
This might work for you. It's off a friend of mines outlaw car. Contact Reed Patridge of Supernatural Turbo at the number below to get more details.
Garrett GT-60 turbo, 3 passes since checkup. Turbo is in perfect condition, 100% Guaranteed good. Ran low 7.30's @ 197 with only 27 psi on our small block.
Specs are, PTE compressor housing w/4" v-band outlet, 106mm GTA compressor wheel, UHP GT-60 turbine wheel (larger than G trim), ALL GARRETT rebuild parts inside, Fully race prepped including custom balancing, fully blueprinted bearing and oil systems and coatings on the turbine housing and bearing housing.
Includes, Turbo with 1.00 A/R, 1.32 A/R and 1.5 A/R turbine housings ready to use (not shown in picture). I will also include 1 service plan checkup that covers full dissasembly, clean-up, new bearings, seals and race balance. This is a $350.00 value that you can use anytime in the next year for FREE. All you will have to cover is shipping. Call me for details!
New all of this will run you over $3,200.00
Asking $1,950.00 for it all, and I will include shipping in the US also.
Please call me with any questions, or PM.
Here is the GT-60 turbine wheel (Left) next to a G-trim for size
I will be happy to help you decide if this turbo is right for your application, please ask any questions!
Thank you,
Reed Patridge
205.516.3946
Garrett GT-60 turbo, 3 passes since checkup. Turbo is in perfect condition, 100% Guaranteed good. Ran low 7.30's @ 197 with only 27 psi on our small block.
Specs are, PTE compressor housing w/4" v-band outlet, 106mm GTA compressor wheel, UHP GT-60 turbine wheel (larger than G trim), ALL GARRETT rebuild parts inside, Fully race prepped including custom balancing, fully blueprinted bearing and oil systems and coatings on the turbine housing and bearing housing.
Includes, Turbo with 1.00 A/R, 1.32 A/R and 1.5 A/R turbine housings ready to use (not shown in picture). I will also include 1 service plan checkup that covers full dissasembly, clean-up, new bearings, seals and race balance. This is a $350.00 value that you can use anytime in the next year for FREE. All you will have to cover is shipping. Call me for details!
New all of this will run you over $3,200.00
Asking $1,950.00 for it all, and I will include shipping in the US also.
Please call me with any questions, or PM.
Here is the GT-60 turbine wheel (Left) next to a G-trim for size
I will be happy to help you decide if this turbo is right for your application, please ask any questions!
Thank you,
Reed Patridge
205.516.3946
Detroit Style Dragger
Banned
I have a GT4788 Matt, Ill work something out with you. I bought it to replace the GT42r on the Probe but, I don't want to make that type of power on a FWD daily.
