Teef racing
Forum Member
sand the whole car with 400 then spray it primer black??
jordans 86 hatch
- Thread starter NOSBigShot
- Start date
sand the whole car with 400 then spray it primer black??
quickstang1983
Club Member
Don't forget to spray bomb "PIIHB" on the doors.....:arco:
jordanbmx
Club Member
jordanbmx
Club Member
were sanding it with 400 and putting it in grey sealer because we already have the paint
igotaneed4speed
Club Member
Grey sealer looks pretty good it has a light gloss to it unlike prime.. good stuff lol.
Soooooo When ya bringing it over so I can take it for a rip lol
supernotch90
Club Member
What color are you planning on I might b able to get some on the deal.
quickstang1983
Club Member
Hey now, did you ever let him drive yours?? Actually, come to think of it, you helped him out enough that you should be able to get a hot pass LOL!
igotaneed4speed
Club Member
I didn't really help lol I just sold him the car and gave him misc. parts here an there...
jordanbmx
Club Member
the stock blue color
jordanbmx
Club Member
you can get shotty
supernotch90
Club Member
do u have the paint code
jordanbmx
Club Member
how do i get that its th blue paint from 1986
FoxbodyJr.
Club Member
hey u got a cage in there? how u gonna run me on the track without a cage? they will throw u off wont they??? heads up right, no spray?!
jordanbmx
Club Member
their aint no cage in it, shit since i dont beleive i can swing a nos kit i guess it will be heads up if i can get it to the track , but i can gaurantee it will be their for high school nationals if you can make that because its gunna be cheap to race in somethin like 20 bucks
FoxbodyJr.
Club Member
when is nationals i was thinking about it, u will still be faster.
jordanbmx
Club Member
april 25. and how do you figure im faster ide honestly like to hear your explanation
nickgregg2007
Club Member
he is goin for the sneaky factor jordan.. playin his car down, watchem run a 11.0 lol jp get er done jordan, i got 10$ on you!
jordanbmx
Club Member
ok so im going to compare our setups
• 8-point roll cage : i have no cage
• UPR double adjustable upper and lower control arms :i have southside upppers and megabite jrs
• frame ties with seat brackets :i have cheepo weld/bolt on ons
• stock 8.8 rearend with 3.08 gear :i have moser axles and 4.30 gear with rebuilt posi with extra clutchs
• stock driveshaft same
• t-5 manual trans with flywheel and clutch :i have stock c4 with shift kit and 2800 stahl convertor
• sumped fuel tank with holley blue fuel pump :sumpted tank with mallory 140 pump
• mallory fuel filter :fram filter
• aeroquipe fittings and 1/2 inch braided line to regulator then 3/8 to both ends of carb :big end fittings with 1/2 aluminum hose from tank to carb
• 650 holly double pumper with manual choke :proform 750 with mechanical secondarys no choke
• performer aluminum intake :victor jr
• bbk full length headers with shorty h-pipe and stock mufflers with 2 1/4 tailpipes :bbk small tube shorty headers,2 1/2 inch h-pipe with 2 1/4 inch flow tubes with 2 chamber flows
• tubular k-member with coilover front shocks : stock k-member a arms with lakewood struts
• brand new floor carpet :1986's finest blue in color
• 4 inch cowl fiberglass hood :stock steel hood
• msd 6al coil and box :same
• 85 ford reman roller distributor :msd distributor
• .30 over 302. :stock bore, stock bolt, true 302
• Full interior,all power,windows,locks,fuel door,hatch,tilt :same without ilt
• mickey thompson 26x10x8 et street slicks on centerlines with frontrunners. :welds on a 27x11.5x15 hoosier et street
yours is lighter with a stick you should win!
• 8-point roll cage : i have no cage
• UPR double adjustable upper and lower control arms :i have southside upppers and megabite jrs
• frame ties with seat brackets :i have cheepo weld/bolt on ons
• stock 8.8 rearend with 3.08 gear :i have moser axles and 4.30 gear with rebuilt posi with extra clutchs
• stock driveshaft same
• t-5 manual trans with flywheel and clutch :i have stock c4 with shift kit and 2800 stahl convertor
• sumped fuel tank with holley blue fuel pump :sumpted tank with mallory 140 pump
• mallory fuel filter :fram filter
• aeroquipe fittings and 1/2 inch braided line to regulator then 3/8 to both ends of carb :big end fittings with 1/2 aluminum hose from tank to carb
• 650 holly double pumper with manual choke :proform 750 with mechanical secondarys no choke
• performer aluminum intake :victor jr
• bbk full length headers with shorty h-pipe and stock mufflers with 2 1/4 tailpipes :bbk small tube shorty headers,2 1/2 inch h-pipe with 2 1/4 inch flow tubes with 2 chamber flows
• tubular k-member with coilover front shocks : stock k-member a arms with lakewood struts
• brand new floor carpet :1986's finest blue in color
• 4 inch cowl fiberglass hood :stock steel hood
• msd 6al coil and box :same
• 85 ford reman roller distributor :msd distributor
• .30 over 302. :stock bore, stock bolt, true 302
• Full interior,all power,windows,locks,fuel door,hatch,tilt :same without ilt
• mickey thompson 26x10x8 et street slicks on centerlines with frontrunners. :welds on a 27x11.5x15 hoosier et street
yours is lighter with a stick you should win!
FoxbodyJr.
Club Member
u got ur dads old 10.90 motor or watever someone told. me, as long as the car is running good i will more than likely go to nationals. and if i dont stall of the line than i may give u a run for the other guys 10 bucks.. lol
FoxbodyJr.
Club Member
i also wont be running slicks so u know. i traded them for tires and tint and other stuff.