Eric@VictoryRacing
Club Sponsor
1) The Basic Kit includes the LM-1 meter, a Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, serial cable for PC connection, 9V battery, exhaust bung and plug, CD and quick-start guide.
2) The RPM Kit is comprised of the basic kit plus the LMA-2 (RPM Converter.) This cable contains a circuit to convert a tach signal into an analog RPM signal that can be logged by the LM-1. This cable also has 4 additional terminal screws to tap into and log other 0-5 V analog sensors from your vehicle.
3) The AuxBox Kit iss comprised of the basic kit plus the LMA-3 (AuxBox) input Expander Cable. The AuxBox will give you the choice of picking sensors existing from the vehicle or use the 5 internal sensors. The five internal sensors are: RPM conversion (from a tach signal or inductive clamp), Manifold Air Pressure (MAP or Boost), Cylinder Head Temperature (CHT) or Exhaust Gas Temperature (EGT), Acceleration, and Injector Duty Cycle (Dwell). Read more about the LMA-3 (AuxBox)
4)The basic LC-1 kit ncludes the LC-1, sensor, cd which includes software and manuals, bung and plug, and a serial cable to connect to the PC.
5) The Standalone Gauge Kit includes the LC-1, sensor, XD-16 digital gauge, cd which includes software and manuals, bung and plug, and a serial cable to connect to the PC
6)The DB-Blue or DB-Red Gauge can be purchased as an accessory to be used with the LC-1 or LM-1. These kits includes the DB Gauge, mounting hardware, CD and quick-start guide.
7)The DB-Blue or DB-Red Gauge Kit comes complete with the patented award-winning LC-1 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit, Software CD, and quick start guide
Please contact us for pricing.
2) The RPM Kit is comprised of the basic kit plus the LMA-2 (RPM Converter.) This cable contains a circuit to convert a tach signal into an analog RPM signal that can be logged by the LM-1. This cable also has 4 additional terminal screws to tap into and log other 0-5 V analog sensors from your vehicle.
3) The AuxBox Kit iss comprised of the basic kit plus the LMA-3 (AuxBox) input Expander Cable. The AuxBox will give you the choice of picking sensors existing from the vehicle or use the 5 internal sensors. The five internal sensors are: RPM conversion (from a tach signal or inductive clamp), Manifold Air Pressure (MAP or Boost), Cylinder Head Temperature (CHT) or Exhaust Gas Temperature (EGT), Acceleration, and Injector Duty Cycle (Dwell). Read more about the LMA-3 (AuxBox)
4)The basic LC-1 kit ncludes the LC-1, sensor, cd which includes software and manuals, bung and plug, and a serial cable to connect to the PC.
5) The Standalone Gauge Kit includes the LC-1, sensor, XD-16 digital gauge, cd which includes software and manuals, bung and plug, and a serial cable to connect to the PC
6)The DB-Blue or DB-Red Gauge can be purchased as an accessory to be used with the LC-1 or LM-1. These kits includes the DB Gauge, mounting hardware, CD and quick-start guide.
7)The DB-Blue or DB-Red Gauge Kit comes complete with the patented award-winning LC-1 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit, Software CD, and quick start guide
Please contact us for pricing.
