Help picking a carb for blow-thru fox?

[MavisBeacon]

I'm trying to decide what size carb to build for my blow-thru project. I have a 302 with afm b41-hr cam, performer rpm heads, vic jr. intake, and novi 2000 supercharger. I have both a 650 & 750 holley dp. Any advice on which one to convert for boost?

 

[foxbodydave]

honestly id say sell both of them to fund you a custom built unit from c&s

 

[orangejuiced86]

x2 on C&S, or prosystems. But I believe C&S has been at it longer with the blow-thru stuff..... Been there done that on the "build your own blow-thru" carb. My next adventure down that road will go right to C&S.

 

[notch92408]

prosystem...

 

[TWISTED]

is for nitrous motors. C&S is for blowthru

 

[orangejuiced86]

I'm personally on the fence with pro systems. I've ran 3 of his carbs, and I always had small issues. Although he was there to answer questions which was nice.

 

[briansc88]

Do any of you guys have experience with barry grants blow through carbs?

 

[MavisBeacon]

From what I have read Demon Blow-Thru carbs take quite a bit of work to get tuned correctly.

 

[ReiKo]

C&S hands down... Tim Huspen who is a local Drag Radial guy runs a C&S...

 

[TWISTED]

Isnt Tim also a dealer for C&S?

 

[Pwraddr]

Isnt Tim also a dealer for C&S?

He used to be, not sure if he still is. As far as pro systems he won't even bother with a blow through if you are 1200ish or more. He says it simply takes too much time to get it right and is not his mainstay business.

This being said I would go with c&s no matter the ho level.

 

[ReiKo]

Tim is also a C&S dealer...

 

[orangejuiced86]

I'm seriously debating another blowthru setup.

 

[TWISTED]

me too!

 

[ReiKo]

Best bet is to get a hold of him on YB... Tims86 is his name...

 

[strokedhatch]

yes c&s or CSU...both very reputable companies...steve morris deals with the CSU..believe he is located in muskegon,mi

 

[Sean]

I would go with C&S. by far the least headachy blow through I have dealt with to date.

However your results may vary.

 

[85 gt 50]

i highly recommend the carb shop. i have a carb from them and the only thing i had to change out of the box was the power valve. from now on they will get all my carb business.