Fuel line help

[SSunset]

I'm trying to make a new fuel line for my 54 Corvette. Originally there was a compression fitting on a copper line connected to the tank and the connection at the fuel pump was a rubber hose with a hose clamp. I'm trying to figure what is proper method of making these connections while using a stainless steel line.

And I believe I should be using a 5/16 fuel line.

The fitting on the gas tank for reference which seems to be 1/2 NPT from trail and error with my thread chaser set:

any ideas.

 

[Lunger]

INLINE TUBE .COM (2) pc. stainless steel 5/16" prebent 60.00

 

[Lunger]

INLINE TUBE .COM    (2) pc. stainless steel 5/16" prebent 60.00

plus there in shelby twp.

sorry for the double post hit the wrong button

 

[soap]

Cut it off and weld an AN fitting on.

--Joe

 

[Billydroveit]

Parker has stainless compression fittings. GOogle parker store, they have local outlets.

Edit http://www.parker.com/literature/In...on/Catalogs/TEST_ANSIASME B31.1B31.3 REV1.pdf

http://www.parker.com/portal/site/P...95d2b210VgnVCM10000032a71dacRCRD&vgnextfmt=EN