xcoldricex
Forum Member
FS: Fox parts: 8.8, TH400, Lakewoods, Koni, Tokico, Wheels/Tires, Driveshaft
Pictures here:
http://picasaweb.google.com/the.souloist/MustangParts#
8.8 rear end with Moser 31 spline 4 lug axles/3" studs, C-clip eliminator, 3.55 or 3.73 gear, Strange Spool $600
Brand new FRPP 3.73 gears $140
Autometer 5" Tach with shift light $100
Hurst Quarter Stick shifter - Reverse manual, TH250/350/375/400, shift knob is cracked and taped on - $100
Suspension:
V8 Springs - $30 - front and uncut rears
V8 Springs - $20 - front and cut rears
Brand New 2003 Cobra Terminator a-arms with prothane bushings - $300 (needs one new balljoint, torn)
Tokico HP Shocks HE3608 $55
Wheels/Tires:
Rear 10 holes with new Fuzion HRI 225/60 tires (4 lug) $60
LSx Fox Swap Stuff:
Fox body LSx swap long tube headers $200
Not clean, not coated, some massaging done, but they get the job done. Stock steering shaft and k-member with modded mounts were used with these headers.
Stock F-body radiator and dual fans and transmission cooler- $125 (no modification needed to fit fox body for the lsx swap)
Tom's Kick Ass 5 lug axles, 31 spline- used 50 miles - $OLD
Eaton 31 spline Posi - used 50 miles - $OLD
Rollerized Turbo 400 built by Mike Riding - $OLD
Lakewood 90/10 Struts (40511) $OLD
Driveshaft - Attaches a TH400 in a foxbody with 8.8 rearend $OLD
Pictures here:
http://picasaweb.google.com/the.souloist/MustangParts#
8.8 rear end with Moser 31 spline 4 lug axles/3" studs, C-clip eliminator, 3.55 or 3.73 gear, Strange Spool $600
Brand new FRPP 3.73 gears $140
Autometer 5" Tach with shift light $100
Hurst Quarter Stick shifter - Reverse manual, TH250/350/375/400, shift knob is cracked and taped on - $100
Suspension:
V8 Springs - $30 - front and uncut rears
V8 Springs - $20 - front and cut rears
Brand New 2003 Cobra Terminator a-arms with prothane bushings - $300 (needs one new balljoint, torn)
Tokico HP Shocks HE3608 $55
Wheels/Tires:
Rear 10 holes with new Fuzion HRI 225/60 tires (4 lug) $60
LSx Fox Swap Stuff:
Fox body LSx swap long tube headers $200
Not clean, not coated, some massaging done, but they get the job done. Stock steering shaft and k-member with modded mounts were used with these headers.
Stock F-body radiator and dual fans and transmission cooler- $125 (no modification needed to fit fox body for the lsx swap)
Tom's Kick Ass 5 lug axles, 31 spline- used 50 miles - $OLD
Eaton 31 spline Posi - used 50 miles - $OLD
Rollerized Turbo 400 built by Mike Riding - $OLD
Lakewood 90/10 Struts (40511) $OLD
Driveshaft - Attaches a TH400 in a foxbody with 8.8 rearend $OLD
Last edited:
