FiveFour2000GT
Forum Member
I have made the decision to sell this project that I dont have time to get together
as for it is taking up alot of room in my garage. Limited time has put off finishing it.
Description:
2000 Mustang GT caged by Pandes performance 8.50 spec prep for 25-2 with rear truss Chromoly
wolf upper and lower control arms, torque boxes welded and anti roll installed
spare tire hole removed
Strange brakes front and rear 10 way strange struts and shocks coil over
Qa1 K-member motor mounts have been removed D&D control arms HPM caster plates flamming river rack with Bumpsteer kit
car has a motor and mid plate for a 5.4 4 valve engine but could be removed easy
8.8 strange spool 33 spline stange axles 3.73 motorsport ring and pinion powered coated with SVO cover SPHERICAL BUSHING ,C-CLIP ELIMINATOR
kirky seat 41900
This car had front core damage so I decied to replace everything to the firewall new rails, aprons and core both sides seeing my buddy works at Sterling Autobody and hooked me up Ford parts also has brand new front fenders and after market cobra facia which is a POS
it has spares on it right now just sold the Prostars
the car is not mini tubed but I had a set of 15 by 10 with 5.5 back space and a 28 10.5 on it with no problem the fox 8.8 in it. Car also needs paint. which I have sitting here
all the parts are new
If you have any questions please call Dave at 734-306-9622
[email protected] Email me I will send you pics or you can come see it
looking to get 6500.00 OBO
as for it is taking up alot of room in my garage. Limited time has put off finishing it.
Description:
2000 Mustang GT caged by Pandes performance 8.50 spec prep for 25-2 with rear truss Chromoly
wolf upper and lower control arms, torque boxes welded and anti roll installed
spare tire hole removed
Strange brakes front and rear 10 way strange struts and shocks coil over
Qa1 K-member motor mounts have been removed D&D control arms HPM caster plates flamming river rack with Bumpsteer kit
car has a motor and mid plate for a 5.4 4 valve engine but could be removed easy
8.8 strange spool 33 spline stange axles 3.73 motorsport ring and pinion powered coated with SVO cover SPHERICAL BUSHING ,C-CLIP ELIMINATOR
kirky seat 41900
This car had front core damage so I decied to replace everything to the firewall new rails, aprons and core both sides seeing my buddy works at Sterling Autobody and hooked me up Ford parts also has brand new front fenders and after market cobra facia which is a POS
it has spares on it right now just sold the Prostars
the car is not mini tubed but I had a set of 15 by 10 with 5.5 back space and a 28 10.5 on it with no problem the fox 8.8 in it. Car also needs paint. which I have sitting here
all the parts are new
If you have any questions please call Dave at 734-306-9622
[email protected] Email me I will send you pics or you can come see it
looking to get 6500.00 OBO
Last edited:
