JoeP.
Club Member
Trying to help a buddy sell his project engine. It's all new, located in Milan, MI.
late model roller motor 5.0
block fresh from machine shop, .030 over tapped for threaded galley plugs
stock crank polished std/std new bearings and freeze plugs
eagle sir floating pin rods, wiseco pro tru flat tops,hastings chrome-moly rings
crane compucam 2020 cam, 262/270 dur and .530/.530 lift
cloyes roller chain. arp main studs,arp head bolts, fel pro 1011-2 head gaskets
gt40 p heads fresh from machine shop, new exh. seats , 3 angle valve job.
spring seats cut for dual springs and guides cut for pc seals.
ferrea 1.90/1.55 5000 series stainless valves ,comp cams 986 springs,10 deg. retainers
and locks, comp pc seals. gt40 intake with ported lower. comes with timing cover gasket
set, oil pan, intake and valve cover gaskets. needs oil pump,lifters, pushrods and rockers
to finish. sold project vehicle so i have no use for this any more. asking $1200.00
call or text John at 734-417-3629
late model roller motor 5.0
block fresh from machine shop, .030 over tapped for threaded galley plugs
stock crank polished std/std new bearings and freeze plugs
eagle sir floating pin rods, wiseco pro tru flat tops,hastings chrome-moly rings
crane compucam 2020 cam, 262/270 dur and .530/.530 lift
cloyes roller chain. arp main studs,arp head bolts, fel pro 1011-2 head gaskets
gt40 p heads fresh from machine shop, new exh. seats , 3 angle valve job.
spring seats cut for dual springs and guides cut for pc seals.
ferrea 1.90/1.55 5000 series stainless valves ,comp cams 986 springs,10 deg. retainers
and locks, comp pc seals. gt40 intake with ported lower. comes with timing cover gasket
set, oil pan, intake and valve cover gaskets. needs oil pump,lifters, pushrods and rockers
to finish. sold project vehicle so i have no use for this any more. asking $1200.00
call or text John at 734-417-3629
Last edited:
