FREE Parts, Misc.

[Fryguy302]

Free stuff....

FREE, pick up in Holly, MI. Will not hold anything, ship anything, or meet anyone anywhere. Hate to throw away stuff someone might want, if you have a use for this stuff, come and get it.


2nd gen (94-2002) Dodge RAM parts- Headlights (cloudy), turn signals, chrome grille (nice), stainless steel step bars for single cab (nice).

Two (2) Crower 1.65 ratio roller rocker arms, I think they are SBC. These are spares I had from back in the day when the TW heads first came out, and the geometry was better with SBC rockers.

Two misc engine oil dipsticks. I think one is Chrome and one is a 94 Mustang one.

2005-2007 Superduty Ford Chrome Grille, chrome is bubbling up, could be sanded down and painted or dipped.

1999-2004 Superduty aftermarket Billet grille, some of the fins bent, could probably straighten them.



Will have pics of this stuff on detroitracing.com in the next couple days. For some reason attachments aren't working for me on here.

 

[1BADAIR]

Hey. Is that MAF mine

 

[Fryguy302]

Hey. Is that MAF mine

It can be if you want it to be.

 

[dline]

What size are the 99 mustang wheels?

 

[Fryguy302]

What size are the 99 mustang wheels?

I think 15".

 

[stevelknievel]

Pmd

 

[derbydad276]

I'll take the Valve cover for 351c/m
They should look good on my f100
Need address

 

[igotaneed4speed]

Text me and address Raj and Ill come grab the rad tomorrow after work.

 

[OldbutNew]

I need some stuff out of those coffee cans. PM sent.

 

[Fryguy302]

Iron 6.0 block, bored .030, modified for additional outside head studs and 1/2" primary studs. Uses LSX 6 bolt type head gaskets. Needs to be decked, slightly distorted, $200

Complete set of valves from AFR 205 LS heads, $100

Lightened T&D shaft rocker setup for cathedral port LS heads, were used on AFR 205 heads, $400

Forged and coated dome pistons for above combo, set up for stock stroke and 6.125" rod. Pistons make over 12:1 compression. $300

Big ass solid roller nitrous camshaft with cam card for this combo, $100

Will sell all of this stuff together for $850. This engine ran deep in the 8s in NMCA street radial.

 

[OldbutNew]

OK boys and girls. I am headed out to The Land of Raj to pick up some of these parts.
The trip will happen either Tuesday or Wednesday evening.
I am willing to pick stuff up for others (Southern Folk). PM me or post up here.

 

[Chris Hansen]

Iron 6.0 block, bored .030, modified for additional outside head studs and 1/2" primary studs. Uses LSX 6 bolt type head gaskets. Needs to be decked, slightly distorted, $200

Complete set of valves from AFR 205 LS heads, $100

Lightened T&D shaft rocker setup for cathedral port LS heads, were used on AFR 205 heads, $400

Forged and coated dome pistons for above combo, set up for stock stroke and 6.125" rod. Pistons make over 12:1 compression. $300

Big ass solid roller nitrous camshaft with cam card for this combo, $100

Will sell all of this stuff together for $850. This engine ran deep in the 8s in NMCA street radial.

Is the .030 bore fresh? And are the pistons good to go back in those cylinders?

 

[Falcon64]

Sent ya pm

 

[Fryguy302]

Is the .030 bore fresh? And are the pistons good to go back in those cylinders?

Yes and yes.

 

[stevelknievel]

If the radials and wiring setup arent spoken for ill take them.

 

[Chris Hansen]

Any pictures of the block and pistons?

 

[OldbutNew]

If the radials and wiring setup arent spoken for ill take them.

You want I should pick them up for you?

 

[Chris Hansen]

You want I should pick them up for you?

Where do you reside? I see you mention southern MI folk!

 

[derbydad276]

OK boys and girls. I am headed out to The Land of Raj to pick up some of these parts.
The trip will happen either Tuesday or Wednesday evening.
I am willing to pick stuff up for others (Southern Folk). PM me or post up here.

grab the sbf 351c valve covers for me and I'll throw ya a 6 pack of a tasty beverage

 

[OldbutNew]

Where do you reside? I see you mention southern MI folk!

I'm in Carleton. Not quite Toledo, but a whole lot closer than Holly!!
So far picking up parts for Derbydad, Falcon64, Stevelkneivel... Heading up Wednesday aftyer work.