Fox Mustang stuff: Flowmaster true dual Grey Interior, FRPP 3.73, Autometer, Cobra arms, etc.

xcoldricex

xcoldricex

Forum Member
Pictures here:
http://picasaweb.google.com/the.souloist/MustangParts#


DSC00884.JPG

True Dual 3.5", H-pipe, Hooker Aerochambers, dumps
Used on a LS1 Notchback... not sure what headers were used with these. $300
Also have Flowmaster 3" to 3.5" ball and flange adapters to run these with 3" headers for some extra $

Grey hatch interior plastics out of a '87 gt, console, front seatbelts, carpet (dirty i think) and hatch carpet
$OLD

Fox:
Wood Speedo cluster face, Passenger wood vent face $15

DSC00856.JPG

Brand new FRPP 3.73 gears $120

DSC00799.jpg

Autometer 5" Tach with shift light $85

Hurst Quarter Stick shifter - Reverse manual, TH250/350/375/400, shift knob is cracked and taped on - $90

Suspension:

4i1l42.jpg

Brand New 2003 Cobra Terminator a-arms with prothane bushings - $280 (needs one new balljoint, torn)
 
Last edited:
yep i'm in ann arbor.

the dual 3.5" exhaust is of ls1sleeper's ls1 swapped fox after it got hit, don't know what headers he used. i decided to go to a single 4" side exit so i won't be using it.

this is from when they were on the car, sorry i don't have better pictures.

mc9.jpg
mikescellpics%u0025252520040.jpg
mikescellpics%u0025252520147.jpg
 
the 3.73's are brand new. cheaper than you can get them anywhere, i think it's reasonable?

you'll have to take all the interior parts, if you're still interested i'll get you a pic of the console.
 
hm, well i saw the car it was pulled out of and it was a '86gt. i'll pull it out and take a picture.

it's the fat arm rest, not the old skinny one
 
Last edited:
You must log in or register to reply here.
Back
Top